Hi
Can someone interpret the rule numbers and protocols in the diald debug
facility please?
I have chopped all my accept times down to 5 seconds in diald/phone.filter
(with an impulse 30,0,0 to keep the link up for the first 30 secs) and
this seems to work OK. Except after the link is dropped, debug 31 leads
to the following message in my /var/log/messages file which prompts
reconnection. Nothing happens and the link is dropped again and so on.
Not a good idea.
-------------------------------------------------------------------------
Nov 20 09:10:53 mercury diald[16310]: filter accepted rule 6 proto 6 len
40 seq f4c760aa ack fd4deed3 flags FIN ACK packet 192.168.1.250,62889 =>
194.205.254.81,80
-------------------------------------------------------------------------
The 194.205.254.81 is obviously a web page from the port number but
otherwise does not resolve to anything and I get no response from ping.
The 192.168.1.250 is the local IP number that is replaced by the dynamic
address.
There is no protocol 6 in /etc/services and is the rule the 6th in the
phone.filter file or what? Similar messages are found when pulling my
mail so I don't want to filter them out at all.
Any ideas?
John
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
