OK, I thought I'd follow up here. I believe the card is working because the
send light on the 3com impact iq does flash, but I think the TA is set wrong
because it doesn't respond with, say, and "OK." I have sent it the command
to put it into 230400 serial mode. So, has anyone seen any information that
could help me in setting up the TA in linux? It's a pretty common device,
so there should be a help page somewhere.
Thanks for any help,
Jacob Joseph
----- Original Message -----
From: "Tan Chee Weei" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 24, 1999 11:50 PM
Subject: Re: 16650 UART Lavaport-ISA serial
> I use :
>
> /sbin/setserial /dev/ttyS? spd_cust baud_base 230400 divisor 1 irq 4 uart
> 16650V2
>
> in my rc.local script and in my applications, I set the port's baud rate
> to 38400 (see setserial man pages for spd_cust)
>
>
> > From: "Jacob Joseph" <[EMAIL PROTECTED]>
> > Date: Wed, 24 Nov 1999 23:20:08 -0800
> > To: <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
> > Subject: 16650 UART Lavaport-ISA serial
> >
> > Hello again. (Yes, I know I ask too many questions)
> > Anyways, I thought I'd ask about getting a Lavaport-ISA 16650 UART
> > serial going in linux(RH6, kernel 2.2.15). Specifically, I need to know
> > what to set it as with setserial. With the baud_base at 230400 and the
> > divisor, I can only communicate at 9600bps(yes, I know its
> > multiplied---don't know how much). I need to know what both the divisor
and
> > baud_base should be set at. Has ever heard of settings for this thing?
Or
> > any 16650 serial? I'd really appreciate any help you could give me.
> >
> > BTW: I'm using a 3com impact IQ ISDN TA.
> >
> > Jacob Joseph
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
