Something's amiss with my chatscript, I fear, but I can't tell what,
other than that I'm not getting logged in. Here're some snips from the
logs, but I don't see why the link is dying on the remote end:
******************SNIP*****************8
Jan 21 00:30:19 sylvester connect: Dialing system
Jan 21 00:30:19 sylvester chat[3910]: timeout set to 45 seconds
Jan 21 00:30:19 sylvester chat[3910]: abort on (NO CARRIER)
Jan 21 00:30:19 sylvester chat[3910]: abort on (BUSY)
Jan 21 00:30:19 sylvester chat[3910]: abort on (NO DIALTONE)
Jan 21 00:30:19 sylvester chat[3910]: abort on (ERROR)
Jan 21 00:30:19 sylvester chat[3910]: send (ATDT6787752500^M)
Jan 21 00:30:19 sylvester chat[3910]: expect (CONNECT)
Jan 21 00:30:19 sylvester chat[3910]: ^M
Jan 21 00:30:21 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 128.63.2.53,53
Jan 21 00:30:22 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,2009 => 204.89.227.10,53
Jan 21 00:30:25 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 128.9.0.107,53
Jan 21 00:30:27 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 192.5.5.241,53
Jan 21 00:30:29 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 198.41.0.4,53
Jan 21 00:30:31 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 128.63.2.53,53
Jan 21 00:30:32 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,2011 => 204.89.227.10,53
Jan 21 00:30:33 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 192.36.148.17,53
Jan 21 00:30:33 sylvester chat[3910]: CONNECT
Jan 21 00:30:33 sylvester chat[3910]: -- got it
Jan 21 00:30:33 sylvester chat[3910]: send (^M)
Jan 21 00:30:34 sylvester connect: Connected
Jan 21 00:30:34 sylvester connect: Logging in
Jan 21 00:30:34 sylvester chat[3913]: timeout set to 15 seconds
Jan 21 00:30:34 sylvester chat[3913]: expect (ogin:)
Jan 21 00:30:34 sylvester chat[3913]: 31200/ARQ/V34/LAPM/V42BIS^M
Jan 21 00:30:35 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 p
acket 208.148.155.228,1059 => 128.9.0.107,53
Jan 21 00:30:36 sylvester chat[3913]: Welcome to Gwinnett Communications
Group,
Inc.^M
Jan 21 00:30:36 sylvester chat[3913]: ^M
Jan 21 00:30:36 sylvester chat[3913]: login:
Jan 21 00:30:36 sylvester chat[3913]: -- got it
Jan 21 00:30:36 sylvester chat[3913]: send (dsj^M)
Jan 21 00:30:36 sylvester chat[3913]: timeout set to 15 seconds
Jan 21 00:30:36 sylvester chat[3913]: expect (ssword:)
Jan 21 00:30:36 sylvester chat[3913]: dsj^M
Jan 21 00:30:36 sylvester chat[3913]: Password:
Jan 21 00:30:36 sylvester chat[3913]: -- got it
Jan 21 00:30:36 sylvester chat[3913]: send (??????)
Jan 21 00:30:36 sylvester connect: Starting Comm Protocol
Jan 21 00:30:36 sylvester chat[3915]: timeout set to 15 seconds
Jan 21 00:30:36 sylvester chat[3915]: expect (PPP session)
Jan 21 00:30:36 sylvester chat[3915]: ^M
Jan 21 00:30:36 sylvester chat[3915]: PPP session
Jan 21 00:30:36 sylvester chat[3915]: -- got it
Jan 21 00:30:36 sylvester chat[3915]: send (ppp^M)
Jan 21 00:30:36 sylvester connect: Protocol started
Jan 21 00:30:36 sylvester diald[3894]: Running pppd (pid = 3917).
Jan 21 00:30:37 sylvester diald[3894]: filter accepted rule 22 proto 17
len 57 packet 208.148.155.228,1059 => 128.8.10.90,53
**************SNIP*********************
Does anyone see why I shouldn't be getting logged in? My username and
password are correct, though the "$USER_NAME" in the log in chat
sequence was "\q$USER_NAME", and the "$PASSWORD" was "$PASSWORD". I
changed them to "$USER_NAME" and "\qPASSWORD" respectively. The
timeouts are 15 and 15 respectively. I let AUTHENTIFY=1 since I don't
use PAP or CHAP. I set PROTOCOL_START="ppp" and left START_ACK=""
In other words:
*****************SNIP*******************
# We're connected try to log in.
message "Logging in"
chat $DEBUG \
TIMEOUT 15 \
"$USER_CHAT_SEQ" "$USER_NAME" \
TIMEOUT 15 \
"$PASSWD_CHAT_SEQ" "\q$PASSWORD"
if [ $? != 0 ]; then
message "Failed to log in"
exit 1
fi
****************SNIP********************
I don't see a "Failed to log in" in /var/log/messages. I would have
thought my login worked, but my connection times out and dies in the
middle of packet traffic. My ISP says I'm not logging in successfully
with this script. Given this info, can anyone tell me why I can't get
connected? (BTW, everything works fine calling pppd manually with
/usr/bin/pon or poff.)
TIA!
--
David S. Jackson http://www.dsj.net
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
GTW/GL d- s+:+ a42 C+++ USL++++ P+>+++ L+++ E++ W++ N++@ o--
K- w--- O++@ M V PS+ PE++ Y+>++ PGP++(+++) t+ 5 X+ R-@ tv b++
DI+++ D++ G++ e++ h---- r+++ y++++
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
