Thanks, but now it looks like I have a one more step before these, I have a
comtrol ISA rocketport 4 in this machine (I have ISDN for my primary Internet
conection with one ISP, 56k to backup ISP and 2x28.8 for fax services). Now
when I attempt access the ports the machine is throwing errors. I know this is
not the list for this type of problem, but I'm hopeing one of you has some
experience with this card and can point me in the right direction or is
willing to take this discussion offline (from this list) and offer some
suggestions.
Thanks again...
John
Iain Stevenson wrote:
> I suggest:
>
> - set up pppd for manual connection - if this doesn't go the rest is
> pointless
> - set up diald and test - don't worry about excess dials for a start, the
> filtering can be adjusted later
> - then set up the masquerading.
>
> Iain Stevenson
>
> on 2/11/00 10:50 PM, John Cichy at [EMAIL PROTECTED] wrote:
>
> > Hello,
> >
> > I currently have a my workstation set up with ipmasq, and use kppp to
> > conect to the internet, when I connected my lan is. I want to offload
> > the gateway function to a 486 machine. I know that I need to have pppd,
> > ipmasq, and diald to get the gateway to work, my question though is
> > where should I start, pppd, diald, ipmasq. The only thing I really setup
> > in my current config was ipmasq, then filled in the blanks on kppp.
> >
> > Thanks in advance...
> >
> > John
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> > the body of a message to [EMAIL PROTECTED]
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
