I am sure this question has been asked before but I could not find a
answer in the FAQ section. I am using the book LINUX NETWORK SECURITY to
set up my home network and it has a copy of diald 0.16.5. I am using
Redhat 5.2 and have been able to make a PPP connection that was
configured by the network configurator. I can start my connection by
typing ifup ppp0. My ISP uses PAP and I can connect with ifup ppp0 but,
if I use diald and it's connect script I can hear my modem dial but
cannot get it to make a ppp connection. I suspect my diald.conf needs
something extra in it so here is a copy.
fifo /etc/diald/diald.ctl
mode ppp
connect "sh /etc/ppp/connect"
device /dev/modem
speed 38400
modem
lock
crtscts
local 127.0.0.2
remote 127.0.0.3
dynamic
defaultroute
pppd-options asyncmap 0
include /usr/lib/diald/standard.filter
#ip-up /usr/local/etc/firewall.rules
#ip-down /usr/local/etc/firewall.reset
Thanks for the help in advance
Ken McConnell
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
