Hello everyone.
I am attempting to get diald working with a ppp link on a Redhat 6.2 system.
ifup ppp0 works fine. However when using diald, the modem dials, pppd
starts and then disconnects after 60 seconds or so.
Any help on this would be greatly appreciated. I have wasted several hours
trying different configurations without any success.
TIA,
Richard Crow
Here is the log:
May 11 11:24:57 fw kernel: SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR
(dynamic channels, max=256) (6 bit encapsulation enabled).
May 11 11:24:57 fw kernel: SLIP linefill/keepalive option.
May 11 11:24:57 fw diald[4271]: Proxy device established on interface sl0
May 11 11:24:58 fw diald[4271]: start sl0: SIOCSIFMETRIC: Operation not
supported
May 11 11:24:58 fw diald[4271]: Diald initial setup completed.
May 11 11:25:42 fw diald[4271]: Trigger: udp 192.168.0.1/1045
206.191.137.21/53
May 11 11:25:42 fw diald[4271]: Calling site 192.168.0.2
May 11 11:26:20 fw diald[4271]: Connected to site 192.168.0.2
May 11 11:26:20 fw diald[4271]: Running pppd (pid = 4296).
May 11 11:27:19 fw diald[4271]: pppd startup timed out. Check your pppd
options. Killing pppd.
Here is my /etc/diald.conf:
mode ppp
connect "/usr/sbin/chat -f /tmp/connect"
device /dev/ttyS0
speed 115200
modem
lock
crtscts
debug 31
pppd-options name {userid} noauth logfile /tmp/log
local 192.168.0.1
remote 192.168.0.2
dynamic
defaultroute
include /usr/lib/diald/standard.filter
Here is /tmp/connect:
"" ATZ OK ATDT5551212 CONNECT
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
