Go to http://www.mandrakeuser.org/connect/cipc.html and copy the script from
this file straight into your rc.firewall file. Edit the IP address range to
suit your network.
This works fine on my machine in combination with diald and routes my two
home machines out to the net without a problem.
Thanks
Alex
----- Original Message -----
From: "Jim Grunewald" <[EMAIL PROTECTED]>
To: "Dima Nemchenko" <[EMAIL PROTECTED]>
Cc: "Linux Diald" <[EMAIL PROTECTED]>
Sent: Sunday, May 14, 2000 7:50 PM
Subject: Re: setting up masquerading
> Dima,
> You are not being patronizing. Yes, rc.firewall is
> interpreted by sh. The first line is: #!/bin/sh.
> Since I sent the original post I have tried sourcing
> rc.firewall (. rc.firewall), executing the results of
> the command, ls rc.firewall, (`ls rc.firewall`) and
> also sourcing the results of ls rc.firewall (. `ls
> rc.firewall`). I have added a script to my /etc/rc.d
> directory named "foo" run with /bin/sh in which it
> echos "THIS IS FOO", then does "ls rc.firewall" then
> executes rc.firewall. It does everything correctly but
> does not execute rc.firewall. I copied rc.firewall to
> just plain "firewall". It All give the same results:
> "ksh: rc.firewall: not found" or some variation!!!
> Then, when in the /etc/rc.d directory, I give the
> command "which rc.firewall" it gives me back
> "/etc/rc.d/rc.firewall"!!! I have made sure that . is
> in my path, I changed the permissions on the /etc/rc.d
> directory to 777. I used the sh shell and then
> executed rc.firewall. Nothing works! There's got to be
> someting really stupid I'm (not) doing.
> Any ideas?
> Thanks for reading this tirade ;-)
> Jim
> --- Dima Nemchenko <[EMAIL PROTECTED]>
> wrote:
> > Jim Grunewald wrote:
> > >
> > > I'm trying to setup masquerading for my home
> > network.
> > > I looked on the Masquerade-HOWTO and got to the
> > part
> > > in testing it where I ping an outside address from
> > the
> > > masqueraded machine. That didn't work so the next
> > > thing is to make sure my /etc/rc.d/rc.firewall
> > script
> > > works (I got it directly out of the HOWTO). When I
> > > tried to run it by hand, my shell (ksh) would say
> > that
> > > it couldn't find it. I tried in the /etc/rc.d
> > > directory, I tried using full path name, I tried
> > > chmoding it to 777 (I'm root) and then running it.
> > > Nothing worked. The file exists, ls sees it, I
> > used
> > > the -F option to display an '*' after the file
> > name so
> > > I'd see white space in the filename if there was
> > any.
> > > There was none.
> > > In the rc.d directory I tried './rc.firewall', I
> > also
> > > tried cutting the name from the results of a
> > directory
> > > listing and pasting it to the command line. How
> > else
> > > can I run this script? I guess another thing I
> > want to
> > > make sure of is that masquerade support is
> > compiled in
> > > the kernel. Is there a way to tell?
> > > Any help would be greatly appreciated.
> > > Thanks,
> > > Jim
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Send instant messages & get email alerts with
> > Yahoo! Messenger.
> > > http://im.yahoo.com/
> > >
> > > -
> > > To unsubscribe from this list: send the line
> > "unsubscribe linux-diald" in
> > > the body of a message to
> > [EMAIL PROTECTED]
> >
> > not being patronizing, but is the interpreter you
> > use for the script
> > there? like #!/bin/sh or whatever?
> >
> > --
> > :D_ima
> >
> > Dima Nemchenko
> > [EMAIL PROTECTED]
> >
> ---------------------------------------------------------------------
> > "Eventually, every frog has to croak."
> > Louis, the
> > "Budweiser Lizard"
>
>
> __________________________________________________
> Do You Yahoo!?
> Send instant messages & get email alerts with Yahoo! Messenger.
> http://im.yahoo.com/
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
