Hi All,
I have installed diald-0.99.1-2 onto a RedHat 6.1 computer with an
existing working ppp setup.
PPP dials and connects fine but is diald is closing the connection
once it is estabished. It believes it to have time out.
Please what have I missed ?
/var/log/messages
Jun 6 20:48:58 gateway chat[1248]: CONNECT
Jun 6 20:48:58 gateway chat[1248]: -- got it
Jun 6 20:48:58 gateway chat[1248]: send (^M)
Jun 6 20:48:58 gateway pppd[1243]: Serial connection established.
Jun 6 20:48:58 gateway pppd[1243]: Using interface ppp0
Jun 6 20:48:58 gateway pppd[1243]: Connect: ppp0 <-->
/dev/modem
Jun 6 20:49:00 gateway kernel: PPP BSD Compression module
registered
Jun 6 20:49:00 gateway kernel: PPP Deflate Compression module
registered
Jun 6 20:49:00 gateway pppd[1243]: local IP address
203.24.198.198
Jun 6 20:49:00 gateway pppd[1243]: remote IP address
203.24.198.12
Jun 6 20:49:21 gateway diald[1219]: Connect script timed out.
Killing script.
Jun 6 20:49:21 gateway pppd[1243]: Terminating on signal 2.
Jun 6 20:49:21 gateway pppd[1243]: Connection terminated.
Jun 6 20:49:21 gateway pppd[1243]: Connect time 0.4 minutes.
Jun 6 20:49:21 gateway pppd[1243]: Sent 1611 bytes, received
1069 bytes.
Jun 6 20:49:22 gateway pppd[1243]: Exit.
Jun 6 20:49:23 gateway diald[1219]: Delaying 30 seconds before
clear to dial.
Jun 6 20:49:23 gateway gpm[450]: Skipping a data packet (?)
/etc/diald.conf
mode ppp
connect /etc/ppp/ppp-on
device /dev/ttyS0
speed 115200
modem
lock
crtscts
noauth
local 192.168.2.2
remote 192.168.2.1
defaultroute
dynamic
start-ppd-timeout 90
accounting-log /var/log/dialdaccounting
include /usr/lib/diald/standard.filter
(modified) contents of etc/ppp/ppp-on,
exec /usr/sbin/pppd debug asyncmap 20A0000 escape FF kdebug
0 $LOCAL_IP:$REMOTE_IP noipdefault netmask $NETMASK
connect $DIALER_SCRIPT
Allen Harvie
Systems Engineer
Dawn Technologies P/L
Phone: 61 3 9690 5611
Fax: 61 3 9690 5633
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
