[PATCH v5 24/46] pwm: sti: add support for initial state retrieval

[Boris Brezillon]

Implement ->get_state() to provide support for initial state retrieval.

Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
---
 drivers/pwm/pwm-sti.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 92abbd5..0fbca94 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -238,6 +238,46 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct 
pwm_device *pwm)
        mutex_unlock(&pc->sti_pwm_lock);
 }
 
+static void sti_pwm_get_state(struct pwm_chip *chip,
+                             struct pwm_device *pwm,
+                             struct pwm_state *pstate)
+{
+       struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+       unsigned int regval, prescaler;
+       u64 timens;
+       int ret;
+
+       /* The clock has to be enabled to access PWM registers */
+       ret = clk_enable(pc->clk);
+       if (ret) {
+               dev_err(chip->dev, "Failed to enable PWM clk");
+               return;
+       }
+
+       regmap_field_read(pc->prescale_high, &regval);
+       prescaler = regval << 4;
+       regmap_field_read(pc->prescale_low, &regval);
+       prescaler |= regval;
+
+       timens = (u64)(prescaler + 1) * NSEC_PER_SEC *
+                (pc->cdata->max_pwm_cnt + 1);
+       do_div(timens, pc->clk_rate);
+
+       pstate->period = timens;
+
+       regmap_read(pc->regmap, STI_DS_REG(pwm->hwpwm), &regval);
+       timens = (u64)(regval + 1) * pstate->period;
+       do_div(timens, pc->cdata->max_pwm_cnt + 1);
+       pstate->duty_cycle = timens;
+
+       regmap_field_read(pc->pwm_en, &regval);
+       pstate->enabled = regval;
+
+       pstate->polarity = PWM_POLARITY_NORMAL;
+
+       clk_disable(pc->clk);
+}
+
 static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
        struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
@@ -249,6 +289,7 @@ static const struct pwm_ops sti_pwm_ops = {
        .config = sti_pwm_config,
        .enable = sti_pwm_enable,
        .disable = sti_pwm_disable,
+       .get_state = sti_pwm_get_state,
        .free = sti_pwm_free,
        .owner = THIS_MODULE,
 };
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html