From: Thor Thayer <ttha...@opensource.altera.com>

In preparation for additional memory module ECCs, add the
memory initialization functions and helper functions used
for memory initialization.

Signed-off-by: Thor Thayer <ttha...@opensource.altera.com>
---
v2: Specify INTMODE selection -> IRQ on each ECC error.
    Insert functions above memory-specific functions so that function
    declarations are not required.
    Use ERRINTENS & ERRINTENR registers instead of read/modify/write.
v3: Changes for common compatibility string:
    - Pass node instead of compatibility string.
    - New altr_init_a10_ecc_device_type() for peripherals.
    - Add __init to altr_init_a10_ecc_block().
    - Add a10_get_irq_mask().
v4  Replace ifdefs with __maybe_unused macro
    Improve if,else statement in altr_init_memory_port()
    Remove confusing comment about shared function.
v5  No change
---
 drivers/edac/altera_edac.c |  192 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/edac/altera_edac.h |    8 ++
 2 files changed, 200 insertions(+)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 2e5940e..6091b76 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 #include <linux/edac.h>
 #include <linux/genalloc.h>
 #include <linux/interrupt.h>
@@ -874,6 +875,197 @@ static irqreturn_t __maybe_unused 
altr_edac_a10_ecc_irq(int irq, void *dev_id)
        return IRQ_NONE;
 }
 
+/******************* Arria10 Memory Buffer Functions *********************/
+
+static inline int a10_get_irq_mask(struct device_node *np)
+{
+       int irq;
+       const u32 *handle = of_get_property(np, "interrupts", NULL);
+
+       if (!handle)
+               return -ENODEV;
+       irq = be32_to_cpup(handle);
+       return irq;
+}
+
+static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+       u32 value = readl(ioaddr);
+
+       value |= bit_mask;
+       writel(value, ioaddr);
+}
+
+static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+       u32 value = readl(ioaddr);
+
+       value &= ~bit_mask;
+       writel(value, ioaddr);
+}
+
+static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+       u32 value = readl(ioaddr);
+
+       return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+       int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+       u32 init_mask, stat_mask, clear_mask;
+       int ret = 0;
+
+       if (port) {
+               init_mask = ALTR_A10_ECC_INITB;
+               stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+               clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+       } else {
+               init_mask = ALTR_A10_ECC_INITA;
+               stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+               clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+       }
+
+       ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+       while (limit--) {
+               if (ecc_test_bits(stat_mask,
+                                 (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+                       break;
+               udelay(1);
+       }
+       if (limit < 0)
+               ret = -EBUSY;
+
+       /* Clear any pending ECC interrupts */
+       writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+       return ret;
+}
+
+static __init int __maybe_unused
+altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+                       u32 ecc_ctrl_en_mask, bool dual_port)
+{
+       int ret = 0;
+       void __iomem *ecc_block_base;
+       struct regmap *ecc_mgr_map;
+       char *ecc_name;
+       struct device_node *np_eccmgr;
+
+       ecc_name = (char *)np->name;
+
+       /* Get the ECC Manager - parent of the device EDACs */
+       np_eccmgr = of_get_parent(np);
+       ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_eccmgr,
+                                                     "altr,sysmgr-syscon");
+       of_node_put(np_eccmgr);
+       if (IS_ERR(ecc_mgr_map)) {
+               edac_printk(KERN_ERR, EDAC_DEVICE,
+                           "Unable to get syscon altr,sysmgr-syscon\n");
+               return -ENODEV;
+       }
+
+       /* Map the ECC Block */
+       ecc_block_base = of_iomap(np, 0);
+       if (!ecc_block_base) {
+               edac_printk(KERN_ERR, EDAC_DEVICE,
+                           "Unable to map %s ECC block\n", ecc_name);
+               return -ENODEV;
+       }
+
+       /* Disable ECC */
+       regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+       writel(ALTR_A10_ECC_SERRINTEN,
+              (ecc_block_base + ALTR_A10_ECC_ERRINTENR_OFST));
+       ecc_clear_bits(ecc_ctrl_en_mask,
+                      (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+       /* Ensure all writes complete */
+       wmb();
+       /* Use HW initialization block to initialize memory for ECC */
+       ret = altr_init_memory_port(ecc_block_base, 0);
+       if (ret) {
+               edac_printk(KERN_ERR, EDAC_DEVICE,
+                           "ECC: cannot init %s PORTA memory\n", ecc_name);
+               goto out;
+       }
+
+       if (dual_port) {
+               ret = altr_init_memory_port(ecc_block_base, 1);
+               if (ret) {
+                       edac_printk(KERN_ERR, EDAC_DEVICE,
+                                   "ECC: cannot init %s PORTB memory\n",
+                                   ecc_name);
+                       goto out;
+               }
+       }
+
+       /* Interrupt mode set to every SBERR */
+       regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
+                    ALTR_A10_ECC_INTMODE);
+       /* Enable ECC */
+       ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+                                       ALTR_A10_ECC_CTRL_OFST));
+       writel(ALTR_A10_ECC_SERRINTEN,
+              (ecc_block_base + ALTR_A10_ECC_ERRINTENS_OFST));
+       regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+       /* Ensure all writes complete */
+       wmb();
+out:
+       iounmap(ecc_block_base);
+       return ret;
+}
+
+static int validate_parent_available(struct device_node *np);
+static const struct of_device_id altr_edac_a10_device_of_match[];
+static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
+{
+       int irq;
+       struct device_node *child, *np = of_find_compatible_node(NULL, NULL,
+                                       "altr,socfpga-a10-ecc-manager");
+       if (!np) {
+               edac_printk(KERN_ERR, EDAC_DEVICE, "ECC Manager not found\n");
+               return -ENODEV;
+       }
+
+       for_each_child_of_node(np, child) {
+               const struct of_device_id *pdev_id;
+               const struct edac_device_prv_data *prv;
+
+               if (!of_device_is_available(child))
+                       continue;
+               if (!of_device_is_compatible(child, compat))
+                       continue;
+
+               if (validate_parent_available(child))
+                       continue;
+
+               irq = a10_get_irq_mask(child);
+               if (irq < 0)
+                       continue;
+
+               /* Get matching node and check for valid result */
+               pdev_id = of_match_node(altr_edac_a10_device_of_match, child);
+               if (IS_ERR_OR_NULL(pdev_id))
+                       continue;
+
+               /* Validate private data pointer before dereferencing */
+               prv = pdev_id->data;
+               if (!prv)
+                       continue;
+
+               altr_init_a10_ecc_block(child, BIT(irq),
+                                       prv->ecc_enable_mask, 0);
+       }
+
+       of_node_put(np);
+       return 0;
+}
+
 /*********************** OCRAM EDAC Device Functions *********************/
 
 #ifdef CONFIG_EDAC_ALTERA_OCRAM
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index cf4e8cb..aa7c690 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -230,8 +230,13 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
 
 #define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_ERRINTENS_OFST     0x14
+#define ALTR_A10_ECC_ERRINTENR_OFST     0x18
 #define ALTR_A10_ECC_SERRINTEN          BIT(0)
 
+#define ALTR_A10_ECC_INTMODE_OFST       0x1C
+#define ALTR_A10_ECC_INTMODE            BIT(0)
+
 #define ALTR_A10_ECC_INTSTAT_OFST       0x20
 #define ALTR_A10_ECC_SERRPENA           BIT(0)
 #define ALTR_A10_ECC_DERRPENA           BIT(8)
@@ -280,6 +285,9 @@ struct altr_sdram_mc_data {
 /* Arria 10 OCRAM ECC Management Group Defines */
 #define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
 
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
+
 struct altr_edac_device_dev;
 
 struct edac_device_prv_data {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to