Em Wed, 5 Oct 2016 15:54:18 -0300
Mauro Carvalho Chehab <mche...@s-opensource.com> escreveu:
> The USB control messages require DMA to work. We cannot pass
> a stack-allocated buffer, as it is not warranted that the
> stack would be into a DMA enabled area.
Please disregard this patch at linux-doc ML. It was sent to the wrong
list by mistake.
Regards,
Mauro
>
> Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
> ---
>
> Added the fixups made by Johannes Stezenbach
>
> drivers/media/usb/dvb-usb/cinergyT2-core.c | 45
> ++++++++++++++++++------------
> 1 file changed, 27 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c
> b/drivers/media/usb/dvb-usb/cinergyT2-core.c
> index 9fd1527494eb..8267e3777af6 100644
> --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
> +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
> @@ -41,6 +41,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
>
> struct cinergyt2_state {
> u8 rc_counter;
> + unsigned char data[64];
> };
>
> /* We are missing a release hook with usb_device data */
> @@ -50,29 +51,36 @@ static struct dvb_usb_device_properties
> cinergyt2_properties;
>
> static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
> {
> - char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
> - char result[64];
> - return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
> - sizeof(result), 0);
> + struct dvb_usb_device *d = adap->dev;
> + struct cinergyt2_state *st = d->priv;
> +
> + st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
> + st->data[1] = enable ? 1 : 0;
> +
> + return dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
> }
>
> static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
> {
> - char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
> - char state[3];
> - return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
> + struct cinergyt2_state *st = d->priv;
> +
> + st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
> + st->data[1] = enable ? 1 : 0;
> +
> + return dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
> }
>
> static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
> {
> - char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
> - char state[3];
> + struct dvb_usb_device *d = adap->dev;
> + struct cinergyt2_state *st = d->priv;
> int ret;
>
> adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
>
> - ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
> - sizeof(state), 0);
> + st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
> +
> + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
> if (ret < 0) {
> deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
> "state info\n");
> @@ -141,13 +149,14 @@ static int repeatable_keys[] = {
> static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int
> *state)
> {
> struct cinergyt2_state *st = d->priv;
> - u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
> int i;
>
> *state = REMOTE_NO_KEY_PRESSED;
>
> - dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
> - if (key[4] == 0xff) {
> + st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
> +
> + dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
> + if (st->data[4] == 0xff) {
> /* key repeat */
> st->rc_counter++;
> if (st->rc_counter > RC_REPEAT_DELAY) {
> @@ -166,13 +175,13 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d,
> u32 *event, int *state)
> }
>
> /* hack to pass checksum on the custom field */
> - key[2] = ~key[1];
> - dvb_usb_nec_rc_key_to_event(d, key, event, state);
> - if (key[0] != 0) {
> + st->data[2] = ~st->data[1];
> + dvb_usb_nec_rc_key_to_event(d, st->data, event, state);
> + if (st->data[0] != 0) {
> if (*event != d->last_event)
> st->rc_counter = 0;
>
> - deb_rc("key: %*ph\n", 5, key);
> + deb_rc("key: %*ph\n", 5, st->data);
> }
> return 0;
> }
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
