On Tue, Jun 06, 2017 at 08:23:25PM +0800, Eryu Guan wrote:
> On Tue, Jun 06, 2017 at 06:15:57AM -0400, Jeff Layton wrote:
> > On Tue, 2017-06-06 at 16:58 +0800, Eryu Guan wrote:
> > > On Wed, May 31, 2017 at 09:08:16AM -0400, Jeff Layton wrote:
> > > > I'm working on a set of kernel patches to change how writeback errors
> > > > are handled and reported in the kernel. Instead of reporting a
> > > > writeback error to only the first fsync caller on the file, I aim
> > > > to make the kernel report them once on every file description.
> > > >
> > > > This patch adds a test for the new behavior. Basically, open many fds
> > > > to the same file, turn on dm_error, write to each of the fds, and then
> > > > fsync them all to ensure that they all get an error back.
> > > >
> > > > To do that, I'm adding a new tools/dmerror script that the C program
> > > > can use to load the error table. For now, that's all it can do, but
> > > > we can fill it out with other commands as necessary.
> > > >
> > > > Signed-off-by: Jeff Layton <jlay...@redhat.com>
> > >
> > > Thanks for the new tests! And sorry for the late review..
> > >
> > > It's testing a new behavior on error reporting on writeback, I'm not
> > > sure if we can call it a new feature or it fixed a bug? But it's more
> > > like a behavior change, I'm not sure how to categorize it.
> > >
> > > Because if it's testing a new feature, we usually let test do proper
> > > detection of current test environment (based on actual behavior not
> > > kernel version) and _notrun on filesystems that don't have this feature
> > > yet, instead of failing the test; if it's testing a bug fix, we could
> > > leave the test fail on unfixed filesystems, this also serves as a
> > > reminder that there's bug to fix.
> > >
> >
> > Thanks for the review! I'm not sure how to categorize this either. Since
> > the plan is to convert all the filesystems piecemeal, maybe we should
> > just consider it a new feature.
>
> Then we need a new _require rule to properly detect for the 'feature'
> support. I'm not sure if this is doable, but something like
> _require_statx, _require_seek_data_hole would be good.
>
> >
> > > I pulled your test kernel tree, and test passed on EXT4 but failed on
> > > other local filesystems (XFS, btrfs). I assume that's expected.
> > >
> > > Besides this kinda high-level question, some minor comments inline.
> > >
> >
> > Yes, ext4 should pass on my latest kernel tree, but everything else
> > should fail.
>
> With the new _require rule, test should _notrun on XFS and btrfs then.
Frankly I personally prefer that upstream XFS fails until someone fixes it. :)
(But that's just my opinion.)
That said, I'm not 100% sure what's required of XFS to play nicely with
this new mechanism -- glancing at the ext* patches it looks like we'd
need to set a fs flag and possibly change some or all of the "write
cached dirty buffers out to disk" calls to their _since variants?
Metadata writeback errors are handled by retrying writes and/or shutting
down the fs, so I think the f_md_wb_error case is already covered.
That said, I agree that it's useful to detect that the kernel simply
lacks any of the new wb error reporting at all, so therefore we can skip
the tests.
--D
>
> >
> > > > ---
> > > > common/dmerror | 13 ++--
> > > > doc/auxiliary-programs.txt | 8 +++
> > > > src/Makefile | 2 +-
> > > > src/fsync-err.c | 161
> > > > +++++++++++++++++++++++++++++++++++++++++++++
> > >
> > > New binary needs an entry in .gitignore file.
> > >
> >
> > OK, thanks. Will fix.
> >
> > > > tests/generic/999 | 76 +++++++++++++++++++++
> > > > tests/generic/999.out | 3 +
> > > > tests/generic/group | 1 +
> > > > tools/dmerror | 44 +++++++++++++
> > >
> > > This file is used by the test, then it should be in src/ directory and
> > > be installed along with other executable files on "make install".
> > > Because files under tools/ are not installed. Most people will run tests
> > > in the root dir of xfstests and this is not a problem, but there're
> > > still cases people do "make && make install" and run fstests from
> > > /var/lib/xfstests (default installation target).
> > >
> >
> > Ok, no problem. I'll move it. I wasn't sure here since dmerror is a
> > shell script, and most of the stuff in src/ is stuff that needs to be
> > built.
>
> We do have a few perl or shell scripts in src/ dir, we can see this from
> src/Makefile
>
> $(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh
> $(PKG_LIB_DIR)/src
>
> >
> > > > 8 files changed, 302 insertions(+), 6 deletions(-)
> > > > create mode 100644 src/fsync-err.c
> > > > create mode 100755 tests/generic/999
> > > > create mode 100644 tests/generic/999.out
> > > > create mode 100755 tools/dmerror
> > > >
> > > > diff --git a/common/dmerror b/common/dmerror
> > > > index d46c5d0b7266..238baa213b1f 100644
> > > > --- a/common/dmerror
> > > > +++ b/common/dmerror
> > > > @@ -23,22 +23,25 @@ if [ $? -eq 0 ]; then
> > > > _notrun "Cannot run tests with DAX on dmerror devices"
> > > > fi
> > > >
> > > > -_dmerror_init()
> > > > +_dmerror_setup()
> > > > {
> > > > local dm_backing_dev=$SCRATCH_DEV
> > > >
> > > > - $DMSETUP_PROG remove error-test > /dev/null 2>&1
> > > > -
> > > > local blk_dev_size=`blockdev --getsz $dm_backing_dev`
> > > >
> > > > DMERROR_DEV='/dev/mapper/error-test'
> > > >
> > > > DMLINEAR_TABLE="0 $blk_dev_size linear $dm_backing_dev 0"
> > > >
> > > > + DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
> > > > +}
> > > > +
> > > > +_dmerror_init()
> > > > +{
> > > > + _dmerror_setup
> > > > + $DMSETUP_PROG remove error-test > /dev/null 2>&1
> > > > $DMSETUP_PROG create error-test --table "$DMLINEAR_TABLE" || \
> > > > _fatal "failed to create dm linear device"
> > > > -
> > > > - DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
> > > > }
> > > >
> > > > _dmerror_mount()
> > > > diff --git a/doc/auxiliary-programs.txt b/doc/auxiliary-programs.txt
> > > > index 21ef118596b6..191ac0596511 100644
> > > > --- a/doc/auxiliary-programs.txt
> > > > +++ b/doc/auxiliary-programs.txt
> > > > @@ -16,6 +16,7 @@ note the dependency with:
> > > > Contents:
> > > >
> > > > - af_unix -- Create an AF_UNIX socket
> > > > + - fsync-err -- tests fsync error reporting after failed
> > > > writeback
> > > > - open_by_handle -- open_by_handle_at syscall exercise
> > > > - stat_test -- statx syscall exercise
> > > > - t_dir_type -- print directory entries and their file type
> > > > @@ -30,6 +31,13 @@ af_unix
> > > >
> > > > The af_unix program creates an AF_UNIX socket at the given
> > > > location.
> > > >
> > > > +fsync-err
> > > > + Specialized program for testing how the kernel reports errors
> > > > that
> > > > + occur during writeback. Works in conjunction with the dmerror
> > > > script
> > > > + in tools/ to write data to a device, and then force it to fail
> > > > + writeback and test that errors are reported during fsync and
> > > > cleared
> > > > + afterward.
> > > > +
> > > > open_by_handle
> > > >
> > > > The open_by_handle program exercises the open_by_handle_at()
> > > > system
> > > > diff --git a/src/Makefile b/src/Makefile
> > > > index 4ec01975f8f7..b79c4d84d31b 100644
> > > > --- a/src/Makefile
> > > > +++ b/src/Makefile
> > > > @@ -13,7 +13,7 @@ TARGETS = dirstress fill fill2 getpagesize holes
> > > > lstat64 \
> > > > multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
> > > > t_mmap_writev t_truncate_cmtime dirhash_collide
> > > > t_rename_overwrite \
> > > > holetest t_truncate_self t_mmap_dio af_unix t_mmap_stale_pmd \
> > > > - t_mmap_cow_race
> > > > + t_mmap_cow_race fsync-err
> > > >
> > > > LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize
> > > > preallo_rw_pattern_reader \
> > > > preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> > > > diff --git a/src/fsync-err.c b/src/fsync-err.c
> > > > new file mode 100644
> > > > index 000000000000..cbeb37fb1790
> > > > --- /dev/null
> > > > +++ b/src/fsync-err.c
> > > > @@ -0,0 +1,161 @@
> > > > +/*
> > > > + * fsync-err.c: test whether writeback errors are reported to all open
> > > > fds
> > > > + * and properly cleared as expected after being seen once
> > > > on each
> > > > + *
> > > > + * Copyright (c) 2017: Jeff Layton <jlay...@redhat.com>
> > > > + */
> > > > +#include <sys/types.h>
> > > > +#include <sys/stat.h>
> > > > +#include <errno.h>
> > > > +#include <fcntl.h>
> > > > +#include <stdlib.h>
> > > > +#include <stdio.h>
> > > > +#include <string.h>
> > > > +#include <unistd.h>
> > > > +
> > > > +/*
> > > > + * btrfs has a fixed stripewidth of 64k, so we need to write enough
> > > > data to
> > > > + * ensure that we hit both stripes.
> > > > + *
> > > > + * FIXME: have the test script pass in the length?
> > > > + */
> > > > +#define BUFSIZE (65 * 1024)
> > > > +
> > > > +/* FIXME: should this be tunable */
> > > > +#define NUM_FDS 10
> > >
> > > Passed through command line parameter, and default value is 10 if not
> > > specified?
> > >
> >
> > Sure. Perhaps we should do the same with BUFSIZE? Particularly if we
> > need to vary it between fs'.
> >
> > > > +
> > > > +static void usage() {
> > > > + fprintf(stderr, "Usage: fsync-err <filename>\n");
> > > > +}
> > > > +
> > > > +int main(int argc, char **argv)
> > > > +{
> > > > + int fd[NUM_FDS], ret, i;
> > > > + char *fname, *buf;
> > > > +
> > > > + if (argc < 1) {
> > > > + usage();
> > > > + return 1;
> > > > + }
> > > > +
> > > > + /* First argument is filename */
> > > > + fname = argv[1];
> > > > +
> > > > + for (i = 0; i < NUM_FDS; ++i) {
> > > > + fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
> > > > + if (fd[i] < 0) {
> > > > + printf("open of fd[%d] failed: %m\n", i);
> > > > + return 1;
> > > > + }
> > > > + }
> > > > +
> > > > + buf = malloc(BUFSIZE);
> > > > + if (!buf) {
> > > > + printf("malloc failed: %m\n");
> > > > + return 1;
> > > > + }
> > > > +
> > > > + memset(buf, 0x7c, BUFSIZE);
> > > > +
> > > > + for (i = 0; i < NUM_FDS; ++i) {
> > > > + ret = write(fd[i], buf, BUFSIZE);
> > > > + if (ret < 0) {
> > > > + printf("First write on fd[%d] failed: %m\n", i);
> > > > + return 1;
> > > > + }
> > > > + }
> > > > +
> > > > + for (i = 0; i < NUM_FDS; ++i) {
> > > > + ret = fsync(fd[i]);
> > > > + if (ret < 0) {
> > > > + printf("First fsync on fd[%d] failed: %m\n", i);
> > > > + return 1;
> > > > + }
> > > > + }
> > > > +
> > > > + /* flip the device to non-working mode */
> > > > + ret = system("./tools/dmerror load_error_table");
> > >
> > > Hmm, how about passing these "load error table" and "load working table"
> > > commands through command line parameters too?
> > >
> > > > + if (ret) {
> > > > + if (WIFEXITED(ret))
> > > > + printf("system: program exited: %d\n",
> > > > + WEXITSTATUS(ret));
> > > > + else
> > > > + printf("system: 0x%x\n", (int)ret);
> > > > +
> > > > + return 1;
> > > > + }
> > > > +
> > > > + for (i = 0; i < NUM_FDS; ++i) {
> > > > + ret = write(fd[i], buf, strlen(buf) + 1);
> > > > + if (ret < 0) {
> > > > + printf("Second write on fd[%d] failed: %m\n",
> > > > i);
> > > > + return 1;
> > > > + }
> > > > + }
> > > > +
> > > > + for (i = 0; i < NUM_FDS; ++i) {
> > > > + ret = fsync(fd[i]);
> > > > + /* Now, we EXPECT the error! */
> > > > + if (ret >= 0) {
> > > > + printf("Success on second fsync on fd[%d]!\n",
> > > > i);
> > > > + return 1;
> > > > + }
> > > > + }
> > > > +
> > > > + for (i = 0; i < NUM_FDS; ++i) {
> > > > + ret = fsync(fd[i]);
> > > > + if (ret < 0) {
> > > > + /* Now the error should be clear */
> > >
> > > It's not obvious to me why error should be clear at this stage, adding
> > > some comments would be good.
> > >
> >
> > Ok. FWIW:
> >
> > We did some writes to a failing device and called fsync and got an error
> > back. Since no more data was written since then, we don't expect to see
> > an error at this point since it should have been "cleared".
>
> Thanks! It wasn't clear to me until I read your kernel patch :)
>
> Thanks,
> Eryu
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
