On Thu, Oct 05, 2017 at 05:15:07PM +0200, Maciej Purski wrote:
> On 10/01/2017 12:31 PM, Jonathan Cameron wrote:
> > On Thu, 28 Sep 2017 14:50:14 +0200
> > Maciej Purski <m.pur...@samsung.com> wrote:
> >
> > > Add optional max expected current property which allows calibrating
> > > the ina sensor in order to achieve requested precision. Document
> > > the changes in Documentation/hwmon/ina2xx.
> > >
> >
> > This is introducing new generic devicetree bindings..
> > I'm not totally sure we want to do this rather than having a
> > manufacturer specific binding... I don't have a good feeling for
> > how common this will be in other devices.
> >
> > If it's generic, then this isn't necessarily the place to define it.
> >
> > Jonathan
> >
>
> I agree, this should be manufacturer-specific property. Thanks.
>
> > > Signed-off-by: Maciej Purski <m.pur...@samsung.com>
> > > ---
> > > Documentation/devicetree/bindings/hwmon/ina2xx.txt | 4 +++-
> > > Documentation/hwmon/ina2xx | 9 +++++----
> > > 2 files changed, 8 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> > > b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> > > index 02af0d9..25ba372 100644
> > > --- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> > > +++ b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> > > @@ -14,11 +14,13 @@ Optional properties:
> > > - shunt-resistor
> > > Shunt resistor value in micro-Ohm
> > > -
> > > +- max-expected-current
> > > + Max expected current value in mA
Also needs a unit suffix as defined in property-units.txt.
> > > Example:
> > > ina220@44 {
> > > compatible = "ti,ina220";
> > > reg = <0x44>;
> > > shunt-resistor = <1000>;
> > > + max-expected-current = <3000>;
> > > };
> > > diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
> > > index cfd31d9..e9ca838 100644
> > > --- a/Documentation/hwmon/ina2xx
> > > +++ b/Documentation/hwmon/ina2xx
> > > @@ -51,10 +51,11 @@ INA230 and INA231 are high or low side current shunt
> > > and power monitors
> > > with an I2C interface. The chips monitor both a shunt voltage drop and
> > > bus supply voltage.
> > > -The shunt value in micro-ohms can be set via platform data or device
> > > tree at
> > > -compile-time or via the shunt_resistor attribute in sysfs at run-time.
> > > Please
> > > -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for
> > > bindings
> > > -if the device tree is used.
> > > +The shunt value in micro-ohms and max expected current in mA can be set
> > > +via platform data or device tree at compile-time or via the
> > > shunt_resistor
> > > +and max_expected_current attributes in sysfs at run-time. Please refer
> > > to the
> > > +Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings if the
> > > +device tree is used.
> > > Additionally ina226 supports update_interval attribute as described in
> > > Documentation/hwmon/sysfs-interface. Internally the interval is the sum
> > > of
> >
> >
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
