On 09/27/17 23:46, Mauro Carvalho Chehab wrote:
> There are several ancillary functions that aren't documented.
s/ancillary/helper/g
>
> Document them.
>
> Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
> ---
> drivers/media/v4l2-core/v4l2-common.c | 14 -----
> include/media/v4l2-common.h | 104
> ++++++++++++++++++++++++++++++----
> 2 files changed, 94 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-common.c
> b/drivers/media/v4l2-core/v4l2-common.c
> index fb9a2a3c1072..ac404d5083e0 100644
> --- a/drivers/media/v4l2-core/v4l2-common.c
> +++ b/drivers/media/v4l2-core/v4l2-common.c
> @@ -320,20 +320,6 @@ static unsigned int clamp_align(unsigned int x, unsigned
> int min,
> return x;
> }
>
> -/* Bound an image to have a width between wmin and wmax, and height between
> - * hmin and hmax, inclusive. Additionally, the width will be a multiple of
> - * 2^walign, the height will be a multiple of 2^halign, and the overall size
> - * (width*height) will be a multiple of 2^salign. The image may be shrunk
> - * or enlarged to fit the alignment constraints.
> - *
> - * The width or height maximum must not be smaller than the corresponding
> - * minimum. The alignments must not be so high there are no possible image
> - * sizes within the allowed bounds. wmin and hmin must be at least 1
> - * (don't use 0). If you don't care about a certain alignment, specify 0,
> - * as 2^0 is 1 and one byte alignment is equivalent to no alignment. If
> - * you only want to adjust downward, specify a maximum that's the same as
> - * the initial value.
> - */
> void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax,
> unsigned int walign,
> u32 *h, unsigned int hmin, unsigned int hmax,
> diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
> index 7ae7840df068..d3f5f907d566 100644
> --- a/include/media/v4l2-common.h
> +++ b/include/media/v4l2-common.h
> @@ -174,17 +174,43 @@ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd,
> struct i2c_client *client,
> */
> unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
>
> +/**
> + * enum v4l2_i2c_tuner_type - specifies the range of tuner address that
> + * should be used when seeking for I2C devices.
> + *
> + * @ADDRS_RADIO: Radio tuner addresses.
> + * Represent the following I2C addresses:
> + * 0x10 (if compiled with tea5761 support)
> + * and 0x60.
> + * @ADDRS_DEMOD: Demod tuner addresses.
> + * Represent the following I2C addresses:
> + * 0x42, 0x43, 0x4a and 0x4b.
> + * @ADDRS_TV: TV tuner addresses.
> + * Represent the following I2C addresses:
> + * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62,
> + * 0x63 and 0x64.
> + * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this
> + * excludes addresses used by the demodulator
> + * from the list of candidates.
> + * Represent the following I2C addresses:
> + * 0x60, 0x61, 0x62, 0x63 and 0x64.
> + *
> + * NOTE: All I2C addresses above use the 7-bit notation.
> + */
> enum v4l2_i2c_tuner_type {
> - ADDRS_RADIO, /* Radio tuner addresses */
> - ADDRS_DEMOD, /* Demod tuner addresses */
> - ADDRS_TV, /* TV tuner addresses */
> - /* TV tuner addresses if demod is present, this excludes
> - addresses used by the demodulator from the list of
> - candidates. */
> + ADDRS_RADIO,
> + ADDRS_DEMOD,
> + ADDRS_TV,
> ADDRS_TV_WITH_DEMOD,
> };
> -/* Return a list of I2C tuner addresses to probe. Use only if the tuner
> - addresses are unknown. */
> +/**
> + * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe.
> + *
> + * @type: type of the tuner type to seek, as defined by
> + * &enum v4l2_i2c_tuner_type.
> + *
> + * NOTE: Use only if the tuner addresses are unknown.
> + */
> const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
>
> /* -------------------------------------------------------------------------
> */
> @@ -228,6 +254,9 @@ void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct
> spi_device *spi,
> * FIXME: these remaining ioctls/structs should be removed as well, but they
> * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET).
> * To remove these ioctls some more cleanup is needed in those modules.
> + *
> + * It doesn't make much sense on documenting them, as what we really want is
> + * to get rid of them.
> */
>
> /* s_config */
> @@ -243,17 +272,72 @@ struct v4l2_priv_tun_config {
>
> /* Miscellaneous helper functions */
>
> -void v4l_bound_align_image(unsigned int *w, unsigned int wmin,
> +/**
> + * v4l_bound_align_image - adjust video dimensions according to
> + * a given criteria.
> + *
> + * @width: pointer to width that will be adjusted if needed.
> + * @wmin: minimum width.
> + * @wmax: maximum width.
> + * @walign: least significant bit on width.
> + * @height: pointer to height that will be adjusted if needed.
> + * @hmin: minimum height.
> + * @hmax: maximum height.
> + * @halign: least significant bit on width.
> + * @salign: least significant bit for the image size (e. g.
> + * :math:`width * height`).
> + *
> + * Bound an image to have @width between @wmin and @wmax, and @height between
> + * @hmin and @hmax, inclusive.
> + *
> + * Additionally, the @width will be a multiple of :math:`2^{walign}`,
> + * the @height will be a multiple of :math:`2^{halign}`, and the overall
> + * size :math:`width * height` will be a multiple of :math:`2^{salign}`.
> + *
> + * .. note::
> + *
> + * #. The image may be shrunk or enlarged to fit the alignment
> constraints.
> + * #. @wmax must not be smaller than @wmin.
> + * #. @hmax must not be smaller than @hmin.
> + * #. The alignments must not be so high there are no possible image
> + * sizes within the allowed bounds.
> + * #. @wmin and @hmin must be at least 1 (don't use 0).
> + * #. For @walign, @halign and @salign, if you don't care about a certain
> + * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment
> + * is equivalent to no alignment.
> + * #. If you only want to adjust downward, specify a maximum that's the
> + * same as the initial value.
> + */
> +void v4l_bound_align_image(unsigned int *width, unsigned int wmin,
> unsigned int wmax, unsigned int walign,
> - unsigned int *h, unsigned int hmin,
> + unsigned int *height, unsigned int hmin,
> unsigned int hmax, unsigned int halign,
> unsigned int salign);
>
> +/**
> + * v4l2_find_nearest_format - find the nearest format size among a discrete
> + * set of resolutions.
> + *
> + * @sizes: array with a pointer to & struct v4l2_frmsize_discrete image
> sizes.
Just say: array of struct v4l2_frmsize_discrete image sizes.
> + * @num_sizes: size of @sizes array.
> + * @width: desired width.
> + * @height: desired heigth.
heigth -> height
> + *
> + * Finds the closest resolution to minimize the width and height differences
> + * between what userspace requested and the supported resolutions.
> + */
> const struct v4l2_frmsize_discrete
> *v4l2_find_nearest_format(const struct v4l2_frmsize_discrete *sizes,
> const size_t num_sizes,
> s32 width, s32 height);
>
> +/**
> + * v4l2_get_timestamp - ancillary routine to get a timestamp to be used when
> + * filling streaming metadata. Internally, it uses ktime_get_ts(),
> + * with is the recommended way to get it.
> + *
> + * @tv: pointer to &stuct timeval to be filled.
stuct -> struct
> + */
> void v4l2_get_timestamp(struct timeval *tv);
>
> #endif /* V4L2_COMMON_H_ */
>
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
