[RFC PATCH 2/5] gpio: gpiolib: Add OF support for maintaining GPIO values on reset

[Andrew Jeffery]

Add flags and the associated flag mappings between interfaces to enable
GPIO reset tolerance to be specified via devicetree.

Signed-off-by: Andrew Jeffery <and...@aj.id.au>
---
 drivers/gpio/gpiolib-of.c       | 2 ++
 drivers/gpio/gpiolib.c          | 5 +++++
 include/dt-bindings/gpio/gpio.h | 4 ++++
 include/linux/of_gpio.h         | 1 +
 4 files changed, 12 insertions(+)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index e0d59e61b52f..4a268ba52998 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -155,6 +155,8 @@ struct gpio_desc *of_find_gpio(struct device *dev, const 
char *con_id,
 
        if (of_flags & OF_GPIO_SLEEP_MAY_LOSE_VALUE)
                *flags |= GPIO_SLEEP_MAY_LOSE_VALUE;
+       if (of_flags & OF_GPIO_RESET_TOLERANT)
+               *flags |= GPIO_RESET_TOLERANT;
 
        return desc;
 }
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index d9dc7e588699..6b4c5df10e84 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3434,6 +3434,7 @@ struct gpio_desc *fwnode_get_named_gpiod(struct 
fwnode_handle *fwnode,
        bool active_low = false;
        bool single_ended = false;
        bool open_drain = false;
+       bool reset_tolerant = false;
        int ret;
 
        if (!fwnode)
@@ -3448,6 +3449,7 @@ struct gpio_desc *fwnode_get_named_gpiod(struct 
fwnode_handle *fwnode,
                        active_low = flags & OF_GPIO_ACTIVE_LOW;
                        single_ended = flags & OF_GPIO_SINGLE_ENDED;
                        open_drain = flags & OF_GPIO_OPEN_DRAIN;
+                       reset_tolerant = flags & OF_GPIO_RESET_TOLERANT;
                }
        } else if (is_acpi_node(fwnode)) {
                struct acpi_gpio_info info;
@@ -3478,6 +3480,9 @@ struct gpio_desc *fwnode_get_named_gpiod(struct 
fwnode_handle *fwnode,
                        lflags |= GPIO_OPEN_SOURCE;
        }
 
+       if (reset_tolerant)
+               lflags |= GPIO_RESET_TOLERANT;
+
        ret = gpiod_configure_flags(desc, propname, lflags, dflags);
        if (ret < 0) {
                gpiod_put(desc);
diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
index 70de5b7a6c9b..01c75d9e308e 100644
--- a/include/dt-bindings/gpio/gpio.h
+++ b/include/dt-bindings/gpio/gpio.h
@@ -32,4 +32,8 @@
 #define GPIO_SLEEP_MAINTAIN_VALUE 0
 #define GPIO_SLEEP_MAY_LOSE_VALUE 8
 
+/* Bit 4 express GPIO persistence on reset */
+#define GPIO_RESET_INTOLERANT 0
+#define GPIO_RESET_TOLERANT 16
+
 #endif
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index 1fe205582111..9b34737706a7 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -32,6 +32,7 @@ enum of_gpio_flags {
        OF_GPIO_SINGLE_ENDED = 0x2,
        OF_GPIO_OPEN_DRAIN = 0x4,
        OF_GPIO_SLEEP_MAY_LOSE_VALUE = 0x8,
+       OF_GPIO_RESET_TOLERANT = 0x16,
 };
 
 #ifdef CONFIG_OF_GPIO
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html