> diff --git a/Documentation/dev-tools/runchecks.rst > b/Documentation/dev-tools/runchecks.rst > new file mode 100644 > index 0000000..b25b3de > --- /dev/null > +++ b/Documentation/dev-tools/runchecks.rst > @@ -0,0 +1,215 @@ > +.. Copyright 2017 Knut Omang <knut.om...@oracle.com> > + > +Makefile support for running checkers > +===================================== > + > +Tools like sparse, coccinelle and scripts/checkpatch.pl is able to detect a
is -> are > +lot of syntactic and semantic issues with the code, and is also constantly is -> are > +evolving and detecting more. In an ideal world, all source files should > +adhere to whatever rules imposed by checkpatch.pl and sparse etc. with all > +bells and whistles enabled, in a way that these checkers can be run as a > reflex > +by developers (and by bots) from the top level Makefile for every changing > +source file. In the real world however there's a number of challenges: > + > +* Sometimes there are valid reasons for accepting violations of a checker > + rule, even if that rule is a sensible one in the general case. > +* Some subsystems have different restrictions and requirements. > + (Ideally, the number of subsystems with differing restrictions and > + requirements will diminish over time.) > +* Similarly, the kernel contains a lot of code that predates the tools, or at > + least some of the newer rules, and we would like these tools to evolve > without > + requiring the need to fix all issues detected with it in the same commit. > + We also want to accommodate new tools, so that each new tool does not > + have to reinvent it's own mechanism for running checks. it's -> its > +* On the other hand, we want to make sure that files that are clean > + (to some well defined extent, such as passing checkpatch or sparse > + with checks only for certain important types of issues) keep being so. > + > +This is the purpose of ``scripts/runchecks``. > + > +The ``runchecks`` program looks for files named ``runchecks.cfg`` in the > +``scripts`` directory, then in the directory hierarchy of the source file, > +starting where that source file is located, searching upwards. If at least > +one such file exists in the source tree, ``runchecks`` parses a set of > +rules from it, and use them to determine how to invoke a set of individual > +checker tools for a particular file. The kernel Makefile system supports > using > +this feature as an integrated part of compiling the code, using the > +``C={1,2}`` option. With:: > + > + make C=1 > + > +runchecks will be invoked if the file needs to be recompiled. With :: > + > + make C=2 > + > +runchecks will be invoked for all source files, even if they do not need > +recompiling. Based on the configuration, ``runchecks`` will invoke one or > +more checkers. The number and types of checkers to run are configurable and > +can also be selected on the command line:: > + > + make C=2 CF="--run:sparse,checkpatch" > + > +If only one checker is run, any parameter that is not recognized by > +runchecks itself will be forwarded to the checker. If more than one checker > +is enabled, parameters can be forwarded to a specific checker by means of > +this syntax:: > + > + make C=2 CF="--to-checkpatch:--terse" > + > +A comma separated list of parameters can be supplied if necessary. > + > +Supported syntax of the runchecks.cfg configuration file > +-------------------------------------------------------- > + > +The runchecks configuration file chain can be used to set policies and "rein > in" > +checker errors piece by piece for a particular subsystem or driver. It can > +also be used to mitigate and extend checkers that does not support does -> do > +selective suppression of all it's checks. it's -> its > +Two classes of configuration is available. The first class is configuration > +that defines what checkers are enabled, and also allow a limited form of > +pattern matching to extend checking, to mitigate for checks that cannot be > +selectively disabled by command line parameters to the underlying tool > +itself. This type of configuration should go into the first accessed > +configuration file, and has been preconfigured for the currently supported > +checkers in ``scripts/runchecks.cfg``. The second class is the features for > +configuring the output of the checkers by selectively suppressing checks on > +a per file or per check basis. These typically goes in the source tree in goes -> go > +the directory of the source file or above. Some of the syntax is generic > +and some is only supported by some checkers. > + > +For the first class of configuration the following syntax is supported:: > + > + # comments > + checker checkpatch [command] > + addflags <list of extra flags and parameters> > + cflags > + typedef NAME <regular expression> > + run [checker list|all] > + > +The ``checker`` command switches ``runchecks``'s attention to a particular > +checker. The following commands until the next ``checker`` statement > +applies to that particular checker. The first occurrence of ``checker`` applies -> apply > +also serves as a potentially defining operation, if the checker name > +has not been preconfigured. In that case, a second parameter can be used > +to provide the name of the command used to run the checker. > +A full checker integration into runchecks will typically require some > +additions to runchecks, and will then have been preconfigured, > +but simple checkers might just be configured on the fly. > + > +The ``addflags`` command incrementally adds more flags and parameters to > +the command line used to invoke the checker. This applies to all > +invocations of the checker from runchecks. > +The ``cflags`` command tells to forward all the flags and options passed to > +the compiler invocation to the checker. The default is to suppress these > +parameters when invoking the checker. > + > +The ``typedef`` command adds ``NAME`` and associates it with the given > +regular expression. This expression is used to match against standard error > +output from the checker and ``NAME`` can be used as a new named check that > +runchecks understands and that can be used with checker supported names > +below to selectively suppress that particular set of warning or error > +messages. This is useful to handle output checks for which the underlying > +checker is does not provide any suppression. Check type namespaces are > +separate for the individual checkers. You can list the state of the built in > and > +configured checker and check types with:: > + > + scripts/runchecks --list > + > +The checker implementations of the ``typedef`` command also allows > +runchecks to perform some unification of output by rewriting the output > +lines, adding optional color support, and use of the new type names in the > +error output, to ease the process of updating the runchecks.cfg files. > +Having a unified representation of the error output also makes it much > +easier to do statistics or other operations on top of an aggregated output > +from several checkers. > + > +For the second class of configuration the following syntax is supported:: > + > + # comments > + checker checker_name > + line_len <n> > + except check_type [files ...] > + pervasive check_type1 [check_type2 ...] > + > +The ``line_len`` directive defines the upper bound of characters per line > +tolerated in this directory. Currently only ``checkpatch`` supports this > +command. The ``except`` directive takes a check type such as for example > +``MACRO_ARG_REUSE``, and a set of files that should not be subject to this > +particular check type. The ``pervasive`` command disables the listed types > +of checks for all the files in the subtree. The ``except`` and > +``pervasive`` directives can be used cumulatively to add more exceptions. > + > +Running checker programs from make > +---------------------------------- > + > +You can run checkpatch subject to rules defined in ``runcheck.cfg`` in the > +directory of the source file by using "make P=1" to run checkpatch on all > files > +that gets recompiled, or "make P=2" to run checkpatch on all source files. > + > +A make variable ``CF`` allows passing additional parameters to > +``runchecks``. You can for instance use:: > + > + make C=2 CF="--run:checkpatch --fix-inplace" > + > +to run only the ``checkpatch`` checker, and to have checkpatch trying to fix trying -> try > +issues it finds - *make sure you have a clean git tree and carefully review > +the output afterwards!* Combine this with selectively enabling of types of > +errors via changes under ``checker checkpatch`` to the local > +``runchecks.cfg``, and you can focus on fixing up errors subsystem or > +driver by driver on a type by type basis. > + > +By default runchecks will skip all files if a ``runchecks.cfg`` file cannot > +be found in the directory of the file or in the tree above. This is to > +allow builds with ``C=2`` to pass even for subsystems that has not yet done > +anything to rein in checker errors. At some point when all subsystems and > +drivers either have fixed all checker errors or added proper > +``runchecks.cfg`` files, this can be changed. > + > +To force runchecks to run a full run in directories/trees where runchecks > +does not find a ``runchecks.cfg`` file as well, use:: > + > + make C=2 CF="-f" > + > +If you like to see all the warnings and errors produced by the checkers, > ignoring > +any runchecks.cfg files except the one under ``scripts``, you can use:: > + > + make C=2 CF="-n" > + > +or for a specific module directory:: > + > + make C=2 M=drivers/infiniband/core CF="--color -n -w" > + > +with the -w option to ``runchecks`` to suppress errors from any of the > +checkers and just continue on, and the ``--color`` option to present errors > +with colors where supported. > + > +Ever tightening checker rules > +----------------------------- > + > +Commit the changes to the relevant ``runchecks.cfg`` together with the code > +changes that fixes a particular type of issue, this will allow automatic > +checker running by default. This way we can ensure that new errors of that > +particular type do not inadvertently sneak in again! This can be done at > +any subsystem or module maintainer's discretion and at the right time > +without having to do it all at the same time. > + > +Before submitting your changes, verify that a full "make C=2" passes with no > +errors. > + > +Extending and improving checker support in ``runchecks`` > +-------------------------------------------------------- > + > +The runchecks program has been written with extensibility in mind. > +If the checker starts it's reporting lines with filename:lineno, there's a it's -> its > +good chance that a new checker can simply be added by adding:: > + > + checker mychecker path_to_mychecker > + > +to ``scripts/runchecks.cfg`` and suitable ``typedef`` expressions to provide > +selective suppressions of output, however it is likely that some quirks are > +needed to make the new checker behave similar to the others, and to support similar -> similarly julia > +the full set of features, such as the ``--list`` option. This is done by > +implementing a new subclass of the Checker class in ``runchecks``. This is > the way > +all the available default supported checkers are implemented, and those > +relatively lean implementations could serve as examples. > diff --git a/Documentation/dev-tools/sparse.rst > b/Documentation/dev-tools/sparse.rst > index 78aa00a..e3e8b27 100644 > --- a/Documentation/dev-tools/sparse.rst > +++ b/Documentation/dev-tools/sparse.rst > @@ -101,5 +101,31 @@ recompiled, or use "make C=2" to run sparse on the files > whether they need to > be recompiled or not. The latter is a fast way to check the whole tree if > you > have already built it. > > -The optional make variable CF can be used to pass arguments to sparse. The > -build system passes -Wbitwise to sparse automatically. > +The "make C={1,2}" form of kernel make indirectly calls sparse via > "runchecks", > +which dependent on configuration and command line options may dispatch calls > to > +other checkers in addition to sparse. Details on how this works is covered > +in Documentation/dev-tools/runchecks.rst . > + > +The optional make variable CF can be used to pass arguments to runchecks for > dispatch > +to sparse. If sparse is the only tool enabled, any option not recognized by > +runchecks will be forwarded to sparse. If more than one tool is active, you > must > +add the parameters you want sparse to get as a comma separated list prefixed > by > +``--to-sparse:``. If you want sparse to be the only checker run, and you want > +some nice colored output, you can specify this as:: > + > + make C=2 CF="--run:sparse --color" > + > +This will cause sparse to be called for all files which are supported by a > valid > +runchecks configuration (again see Documentation/dev-tools/runchecks.rst for > +details). If you want to run sparse on all files and ignore any missing > +configuration files(s), just add ``-n`` to the list of options passed to > +runchecks. This will cause runchecks to call sparse with all errors enabled > for > +all files even if no valid configuration is found in the tree for the source > files. > + > +By default "runchecks" is set to enable all sparse errors, but you can > +configure what checks to be applied by sparse on a per file or per subsystem > +basis. With the above invocation, make will fail and stop on the first file > +encountered with sparse errors or warnings in it. If you want to continue > +anyway, you can use:: > + > + make C=2 CF="--run:sparse --color -w" > diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt > index ac2363e..260e688 100644 > --- a/Documentation/kbuild/kbuild.txt > +++ b/Documentation/kbuild/kbuild.txt > @@ -103,10 +103,13 @@ CROSS_COMPILE is also used for ccache in some setups. > > CF > -------------------------------------------------- > -Additional options for sparse. > -CF is often used on the command-line like this: > +Additional options for runchecks, the generic checker runner. > +CF is often used on the command-line for instance like this: > > - make CF=-Wbitwise C=2 > + make C=2 CF="--run:sparse --color -w" > + > +to run the sparse tool only, and to use colored output and continue on > warnings > +or errors. > > INSTALL_PATH > -------------------------------------------------- > -- > git-series 0.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html