Re: [PATCH 1/2] hwmon: ina3221: Add power sysfs nodes

[Guenter Roeck]

Hi Nicolin,

On 09/25/2018 11:42 PM, Nicolin Chen wrote:

The hwmon sysfs ABI supports powerX_input and powerX_crit. This
can ease user space programs who care more about power in total
than voltage or current individually.

So this patch adds these two sysfs nodes for INA3221 driver.

Ah, sorry, we can't do that. The sysfs nodes are for chips providing power
registers, not for kernel drivers to provide calculations based on voltage
and current measurements. Basic guideline is that we report what is there,
not some  calculation based on it.

This is even more true for power limits: We can not assume that the power limit
is (max voltage * max current). or (current voltage * max_current), or anything
else. We simply don't have the knowledge to make that assumption.

Thanks,
Guenter

Signed-off-by: Nicolin Chen <nicoleots...@gmail.com>
---
  Documentation/hwmon/ina3221 |   4 +
  drivers/hwmon/ina3221.c     | 145 ++++++++++++++++++++++++++++++++----
  2 files changed, 133 insertions(+), 16 deletions(-)

diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221
index 2726038be5bd..6be64b553cd0 100644
--- a/Documentation/hwmon/ina3221
+++ b/Documentation/hwmon/ina3221
@@ -34,3 +34,7 @@ curr[123]_max           Warning alert current(mA) setting, 
activates the
                            average is above this value.
  curr[123]_max_alarm     Warning alert current limit exceeded
  in[456]_input           Shunt voltage(uV) for channels 1, 2, and 3 
respectively
+power[123]_input        Power(uW) measurement channels
+power[123]_crit         Critical alert power(uW) setting, activates the
+                          corresponding alarm when the respective power
+                          is above this value
diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index ce4d1f55e9cd..5890a2da3bfe 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -38,6 +38,8 @@
  #define INA3221_WARN3                 0x0c
  #define INA3221_MASK_ENABLE           0x0f

+#define INA3221_BUS(x) (INA3221_BUS1 + ((x) << 1))

+
  #define INA3221_CONFIG_MODE_SHUNT     BIT(1)
  #define INA3221_CONFIG_MODE_BUS               BIT(2)
  #define INA3221_CONFIG_MODE_CONTINUOUS        BIT(3)
@@ -172,43 +174,50 @@ static ssize_t ina3221_show_shunt_voltage(struct device 
*dev,
        return snprintf(buf, PAGE_SIZE, "%d\n", voltage_uv);
  }

-static ssize_t ina3221_show_current(struct device *dev,

-                                   struct device_attribute *attr, char *buf)
+static int __ina3221_show_current(struct ina3221_data *ina,
+                                 unsigned int reg, int *current_ma)
  {
-       struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
-       struct ina3221_data *ina = dev_get_drvdata(dev);
-       unsigned int reg = sd_attr->index;
        unsigned int channel = register_channel[reg];
        struct ina3221_input *input = &ina->inputs[channel];
        int resistance_uo = input->shunt_resistor;
-       int val, current_ma, voltage_nv, ret;
+       int val, voltage_nv, ret;

+ /* Read bus shunt voltage */

        ret = ina3221_read_value(ina, reg, &val);
        if (ret)
                return ret;
+
+       /* LSB (4th bit) is 40 uV (40000 nV) */
        voltage_nv = val * 40000;

- current_ma = DIV_ROUND_CLOSEST(voltage_nv, resistance_uo);

+       *current_ma = DIV_ROUND_CLOSEST(voltage_nv, resistance_uo);

- return snprintf(buf, PAGE_SIZE, "%d\n", current_ma);

+       return 0;
  }

-static ssize_t ina3221_set_current(struct device *dev,

-                                  struct device_attribute *attr,
-                                  const char *buf, size_t count)
+static ssize_t ina3221_show_current(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
  {
        struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
        struct ina3221_data *ina = dev_get_drvdata(dev);
        unsigned int reg = sd_attr->index;
-       unsigned int channel = register_channel[reg];
-       struct ina3221_input *input = &ina->inputs[channel];
-       int resistance_uo = input->shunt_resistor;
-       int val, current_ma, voltage_uv, ret;
+       int current_ma, ret;

- ret = kstrtoint(buf, 0, &current_ma);

+       ret = __ina3221_show_current(ina, reg, &current_ma);
        if (ret)
                return ret;

+ return snprintf(buf, PAGE_SIZE, "%d\n", current_ma);

+}
+
+static int __ina3221_set_current(struct ina3221_data *ina,
+                                unsigned int reg, int current_ma)
+{
+       unsigned int channel = register_channel[reg];
+       struct ina3221_input *input = &ina->inputs[channel];
+       int resistance_uo = input->shunt_resistor;
+       int val, voltage_uv, ret;
+
        /* clamp current */
        current_ma = clamp_val(current_ma,
                               INT_MIN / resistance_uo,
@@ -226,6 +235,26 @@ static ssize_t ina3221_set_current(struct device *dev,
        if (ret)
                return ret;

+ return 0;

+}
+
+static ssize_t ina3221_set_current(struct device *dev,
+                                  struct device_attribute *attr,
+                                  const char *buf, size_t count)
+{
+       struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
+       struct ina3221_data *ina = dev_get_drvdata(dev);
+       unsigned int reg = sd_attr->index;
+       int current_ma, ret;
+
+       ret = kstrtoint(buf, 0, &current_ma);
+       if (ret)
+               return ret;
+
+       ret = __ina3221_set_current(ina, reg, current_ma);
+       if (ret)
+               return ret;
+
        return count;
  }

@@ -278,6 +307,68 @@ static ssize_t ina3221_show_alert(struct device *dev,

        return snprintf(buf, PAGE_SIZE, "%d\n", regval);
  }

+static ssize_t ina3221_show_power(struct device *dev,

+                                 struct device_attribute *attr, char *buf)
+{
+       struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
+       struct ina3221_data *ina = dev_get_drvdata(dev);
+       unsigned int reg = sd_attr->index;
+       unsigned int channel = register_channel[reg];
+       unsigned int reg_bus = INA3221_BUS(channel);
+       int val, current_ma, voltage_mv, ret;
+       s64 power_uw;
+
+       /* Read bus voltage */
+       ret = ina3221_read_value(ina, reg_bus, &val);
+       if (ret)
+               return ret;
+
+       /* LSB (4th bit) is 8 mV */
+       voltage_mv = val * 8;
+
+       /* Read calculated current */
+       ret = __ina3221_show_current(ina, reg, &current_ma);
+       if (ret)
+               return ret;
+
+       power_uw = (s64)voltage_mv * current_ma;
+
+       return snprintf(buf, PAGE_SIZE, "%lld\n", power_uw);
+}
+
+static ssize_t ina3221_set_power(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t count)
+{
+       struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
+       struct ina3221_data *ina = dev_get_drvdata(dev);
+       unsigned int reg = sd_attr->index;
+       unsigned int channel = register_channel[reg];
+       unsigned int reg_bus = INA3221_BUS(channel);
+       int val, current_ma, voltage_mv, ret;
+       s64 power_uw;
+
+       ret = kstrtos64(buf, 0, &power_uw);
+       if (ret)
+               return ret;
+
+       /* Read bus voltage */
+       ret = ina3221_read_value(ina, reg_bus, &val);
+       if (ret)
+               return ret;
+
+       /* LSB (4th bit) is 8 mV */
+       voltage_mv = val * 8;
+
+       current_ma = DIV_ROUND_CLOSEST(power_uw, voltage_mv);
+
+       ret = __ina3221_set_current(ina, reg, current_ma);
+       if (ret)
+               return ret;
+
+       return count;
+}
+
  /* input channel label */
  static SENSOR_DEVICE_ATTR(in1_label, 0444,
                ina3221_show_label, NULL, INA3221_CHANNEL1);
@@ -350,6 +441,22 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO,
  static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO,
                ina3221_show_shunt_voltage, NULL, INA3221_SHUNT3);

+/* calculated power */

+static SENSOR_DEVICE_ATTR(power1_input, 0444,
+               ina3221_show_power, NULL, INA3221_SHUNT1);
+static SENSOR_DEVICE_ATTR(power2_input, 0444,
+               ina3221_show_power, NULL, INA3221_SHUNT2);
+static SENSOR_DEVICE_ATTR(power3_input, 0444,
+               ina3221_show_power, NULL, INA3221_SHUNT3);
+
+/* critical power */
+static SENSOR_DEVICE_ATTR(power1_crit, 0644,
+               ina3221_show_power, ina3221_set_power, INA3221_CRIT1);
+static SENSOR_DEVICE_ATTR(power2_crit, 0644,
+               ina3221_show_power, ina3221_set_power, INA3221_CRIT2);
+static SENSOR_DEVICE_ATTR(power3_crit, 0644,
+               ina3221_show_power, ina3221_set_power, INA3221_CRIT3);
+
  static struct attribute *ina3221_attrs[] = {
        /* channel 1 -- make sure label at first */
        &sensor_dev_attr_in1_label.dev_attr.attr,
@@ -361,6 +468,8 @@ static struct attribute *ina3221_attrs[] = {
        &sensor_dev_attr_curr1_max.dev_attr.attr,
        &sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
        &sensor_dev_attr_in4_input.dev_attr.attr,
+       &sensor_dev_attr_power1_input.dev_attr.attr,
+       &sensor_dev_attr_power1_crit.dev_attr.attr,

/* channel 2 -- make sure label at first */

        &sensor_dev_attr_in2_label.dev_attr.attr,
@@ -372,6 +481,8 @@ static struct attribute *ina3221_attrs[] = {
        &sensor_dev_attr_curr2_max.dev_attr.attr,
        &sensor_dev_attr_curr2_max_alarm.dev_attr.attr,
        &sensor_dev_attr_in5_input.dev_attr.attr,
+       &sensor_dev_attr_power2_input.dev_attr.attr,
+       &sensor_dev_attr_power2_crit.dev_attr.attr,

/* channel 3 -- make sure label at first */

        &sensor_dev_attr_in3_label.dev_attr.attr,
@@ -383,6 +494,8 @@ static struct attribute *ina3221_attrs[] = {
        &sensor_dev_attr_curr3_max.dev_attr.attr,
        &sensor_dev_attr_curr3_max_alarm.dev_attr.attr,
        &sensor_dev_attr_in6_input.dev_attr.attr,
+       &sensor_dev_attr_power3_input.dev_attr.attr,
+       &sensor_dev_attr_power3_crit.dev_attr.attr,

NULL,

  };