On Fri, Aug 22, 2025 at 04:41:48AM +0000, [email protected]
wrote:
> > +
> > +/**
> > + * mucse_check_for_msg_pf - Check to see if the fw has sent mail
> > + * @hw: pointer to the HW structure
> > + *
> > + * @return: 0 if the fw has set the Status bit or else
> > + * -EIO
> > + **/
> > +static int mucse_check_for_msg_pf(struct mucse_hw *hw)
> > +{
> > + struct mucse_mbx_info *mbx = &hw->mbx;
> > + u16 hw_req_count = 0;
> I don't think you need to assign 0 here as this variable is updated in
> the next line.
>
> Best regards,
> Parthiban V
Got it, I will update this.
> > +
> > + hw_req_count = mucse_mbx_get_fwreq(mbx);
> > + /* chip's register is reset to 0 when rc send reset
> > + * mbx command. This causes 'hw_req_count != hw->mbx.fw_req'
> > + * be TRUE before fw really reply. Driver must wait fw reset
> > + * done reply before using chip, we must check no-zero.
> > + **/
> > + if (hw_req_count != 0 && hw_req_count != hw->mbx.fw_req) {
> > + hw->mbx.stats.reqs++;
> > + return 0;
> > + }
> > +
> > + return -EIO;
> > +}
> > +
Thanks for your feedback.
