Karim Amrani writes: > Hi there, > > I try to tune on a PID on HotBird and I can't get the status of the > frontend to FE_HAS_LOCK. > > If I plug an Astra cable on my PC, I can tune (on a another PID/freq/...) > without problem. And if I plug a set top box on that Hotbird cable, it > works... So my guess is that it's not an installation issue (?). > > After setting the SEC parameters, I set the tuning parameters. Then, I wait > for the Frontend to send me a COMPLETION_EV. And I only get UNEXPECTED_EV > and then I get FAILURE_EV...(failure code is 20 (decimal)). > After 20 tries, I get bored and I try to get the frontend status : the > status remains HAS_POWER... > > Has someone experienced that before ? Is there something I missed somewhere ? > > Thanks in advance, > Sicerely, > Karim > > PS : For the Audacious, here is test.c (in DVB/apps/test), I (quickly) > modified to suit my needs and further down, you'll find the output. > > > qpsk.iFrequency=(10911000-9750000); /* frequency is 10.911 GHz so LOF1 Have you tried channels in the upper range ?
It could be that your LNB needs to much power for the card. We had some LNBs that could not be switched by the DVB cards because of that. A standalone receiver provides much more power than the card can. Marcus -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
