Hi, installing the 0.9.4 DVB driver fails for me with strange Problems:
Build is ok, make insmod reports success, dmesg shows: VES1893: attaching VES1893 at 0x10 to adapter saa7146(1) SP8870: no SP8870 found ... tuner: chip found @ 0x61 i2c-core.o: client [i2c tv tuner chip] registered to adapter [saa7146(1)](pos. 1). i2c-core.o: adapter saa7146(1) registered as adapter 0. saa7146_core.o: saa7146(2): bus:0, rev:1, mem:0xc4ce2000. i2c-core.o: client [VES1893] registered to adapter [saa7146(2)](pos. 0). VES1893: attaching VES1893 at 0x10 to adapter saa7146(2) SP8870: no SP8870 found ... tuner: chip found @ 0x61 i2c-core.o: client [i2c tv tuner chip] registered to adapter [saa7146(2)](pos. 1). i2c-core.o: adapter saa7146(2) registered as adapter 1. But then it ends up with: dvb0: AV7111 - firm f0240009, rtsl b0250018, vid 71010068, app 00012119 dvb: 1 dvb(s) found! which is not correct since there are 2 DVBs running (ie with 0.9.3). in addition when vdr start it immidiately freezes the machine. Any Ideas what happens here? Everything is fine with 0.9.3. The cards are Technotrend DVB-S (Philips Semiconductors SAA7146 (#2) (rev 1).), I tried it with Kernel 2.4.9, 2.4.17 and 2.4.18 same effect on all. regards & tia tim -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
