[linux-dvb] Hard time reading MPEG2s + Sat lock with Hauppage WinTV Nexus DVB-s

[Alexandre CONRAD]

Hello,

I'm having a hardtime reading MPEG2s with The Hauppage Nexus DVB-s. The MPEG2s I'm making are IBP. But for some reason, some of the MPEGs played in ntuxplayer will just start reading a very few percent and stop. I have to press the "p" button (p : playback) many times until it gets started by it self. It's like an old car engine you have to start manually, then it goes. The file is 7mb/s. Can anyone tell me more about that ? What are the formats supported ? It seems that the file starts okay when I'm at 2mb/s or under. But above, I have to "push it". Any ideas ? Maybe I could setup an FTP so you could download the files, and try it on your setup ? Please all let me know.

I have an other question :

I haven't tryed locking to a TV channel yet. But what's the command to lock on a frequeny ? Do I have to give a PID for both audio and video ? I'm pointing on Eutelsat W3. There are a very few TV channels there. But I'm been quicky looking around the drivers to have the card to lock to a signal, but it seems, I have to put in many settings that I don't know. Here are the settings I know :

freq : 11,283
Pol : V
Beam : EU
Analoogue / Digital : DVB
Audio MhZ FEC : 3/4
Symb Rate : 27.5
Access : Clear

How can I know the audio and video PID if that are the only settings I have to lock to the channel ? And if I ever get it locked, will the image appear on TV ? Or do I need to start an other command / application ?

Thank you very much for your help.
Best regards,

--
Alexandre CONRAD
Research & Development
tel : +33 1 30 80 55 00
fax : +33 1 30 56 50 20
TLV
6, rue de la plaine
78860 - SAINT NOM LA BRETECHE
FRANCE




--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.