Hi! I'm using a NEXUS-s and a NOVA-s. So I'm using the new uni_stv0299.c frontend posted from Peter Schildmann. On the NEXUS everything works fine. On the NOVA all h-polarized channels are fine too. But on v-polarization (ASTRA) MTV Central eg. does work, SAT.1, VIVA ZWEI does not.
> szap "mtv central" zapping to 'MTV Central': sat 0, frequency = 12699 MHz V, symbolrate 22000000, vpid = 0x0bd7, apid = 0x0bd8 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1f | signal ac74 | snr ce85 | ber 0000ff00 | unc 00000000 | FE_HAS_LOCK status 1f | signal ab4b | snr ce61 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ac87 | snr ce88 | ber 00000000 | unc 00000000 | FE_HAS_LOCK > zap "viva zwei" zapping to 'VIVA ZWEI': sat 0, frequency = 12552 MHz V, symbolrate 22000000, vpid = 0x00ab, apid = 0x00ac using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1f | signal bcbb | snr db5d | ber 0000ff00 | unc 00000000 | FE_HAS_LOCK status 1f | signal bb92 | snr d3c5 | ber 00008500 | unc 00000000 | FE_HAS_LOCK status 1f | signal bb7c | snr da88 | ber 00007400 | unc 00000000 | FE_HAS_LOCK > szap sat.1 zapping to 'SAT.1': sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, apid = 0x0700 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal b59b | snr cb22 | ber 00009400 | unc 00000000 | status 07 | signal b857 | snr d0f5 | ber 0000ff2b | unc 00000000 | status 1f | signal b8f7 | snr cff3 | ber 0000ff00 | unc 00000000 | FE_HAS_LOCK status 03 | signal 9ec5 | snr ade8 | ber 00007d00 | unc 00000000 | Viewing of SAT.1 isn't possible, VIVA ZWEI sometimes gets a viewable picture. Using MS-Windows SAT.1 could be view without problems, VIVA 2 sometimes have artefacts. I've taken my PC to a friend - everything worked o.k.. So it's a problem between LNB, Multiswitch and NOVA-s. I exchanged the h and v input cables on my multiswitch and changed in the channels.conv every h to v and vice versa. You may guess it, now every v-polarized channel works and the h-polarized channels doesn't. The low output volatage is only 12.6V. Does that matter if the multiswitch has its own powersupply? In the vdr ML I read something about "- Adding 0.5V to the LNB line (switchable)" how can I do the ioctl call? I patched the driver to dismiss the zigzag frequency adjust - The channel stays locked more often but the bit error rate didn't change. Then I changed the charge pump current of the TSA 5059 C1/C0 which had only little effect on the mean bit error rate C1/C0 (buf[3]|=) 00 40 80 c0 ProSieben A : ff00 ff00 ff00 ff00 12051 MHz SAT.1 : b000 9000 7000 7000 12480 MHz VIVA ZWEI : 8000 6000 8000 9000 12552 MHz LibertyTV.com : 6000 5000 6000 0600 12611 MHz n-tv : 0000 0000 0000 0000 12670 MHz MTV Central : 0000 0000 0000 0000 12699 MHz Why gets the Windows driver better results? Any further ideas? thanx in advance Matthias -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
