Hi, I have a full featured DVB-T card I obtained from Hauppauge some months ago. I have only just got around to installing it. I have a problem with the front end, I have seen many reports about the front end locking up, and my initial testing with this card under the Windows environment shows this problem on a regular basis, though I am still able to tune much of the time. Under Linux using the tzap program I don't seem to get appear to get any data at all from the front end.
I have loaded the dvb-ttpci module and the alps_tdlb7 module, and this is the output I get consistently from tzap: using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 546000000 Hz status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | Can anyone give me a hint as to whats going on. I have tried this using the 1.0.0 driver and the 1.0.1 driver. I have also tried on kernels 2.4.2, 2.4.22 and 2.6.0test7. It is has also been tried on two different sets of hardware, one of which I was able to run the card in Windows with minimal trouble. Thanks Dave -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
