I am looking for some help. I am running recent vdr and dvb (latest firmware), but I still have some problems with A/V sync playing recordings.
But I noticed something very strange, the problem (with same recording) is gone when I tune to another transponder, and then start the play-back.
So I started reading this list, and debugging a bit. I used the test_stc program from DVB\apps\test, put this in a 100 ms loop, and looked at the output.
On a "good" transponder, I see the STC value incrementing, when I start play-back, the STC "jumps" to the values from the recording, and back when I stop play-back. On a "error" transponder the values jump between the values from the recording, and the values normaly send on the transponder. This "error" transponder is 12515 H S19,2E (Dutch). On this transponder there is a seperate PCR pid (for all channels). As far as I could test ,the problem is independent from PCR settings I put in vdr. Even if I do not define any PCR (or a wrong one), when I start the playback, the STC will somehow pick-up the transponder PCR value.
I believe this can only happen if the firmware still scans the PMT for this PCR pid in some situations. Can this be thru ?
Greetings Rene.
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
