First of all thanks for that great software! I am using the Siemens DVB-C Card with analoge module. VDR works great.
Now I try to activate the analoge module. It works, but only partially. There is even sound. I cannot switch between analoge channels. scantv hangs after it has discovered 2 or so channels. While santv is discovering channels, I can see them with xawtv. Interupting scantv will keep that channel switching to dvb (vdr is running) works. Letting scantv to continue results scantv hangs. The configuration of my Debian-like (sarge) box is: Kernel : 2.4.22 xawtv : 3.89-0.1 vdr : 1.2.2 dvb : latest CVS-Version (09.11.2003) Here my commands and errors: > cd <PATH2DVB>/dvb-kernel/build-2.4 > getlinks > make > make install > ./insmod load > dmesg saa7146: register extension 'budget dvb'. saa7146: register extension 'budget dvb /w video in'. saa7146: register extension 'dvb'. PCI: Found IRQ 4 for device 00:0a.0 PCI: Setting latency timer of device 00:0a.0 to 64 saa7146_core: found saa7146 @ mem dc925000 (revision 1, irq 4) (0x110a,0x0000). DVB: registering new adapter (Siemens cable card PCI rev1.5). DVB: VES1820(0): setup for tuner spXXXX DVB: VES1820(0): pwm=0x52 DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)... Siemens cable card PCI rev1.5 adapter 0 has MAC addr = 00:d0:5c:01:83:9f DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b DVB: AV7111(0) - firmware supports CI link layer interface av7110(0): DVB-C analog module detected, initializing MSP3400 av7110(0): MSP3400 version 0x0303 0x0008 saa7146_fops: saa7146 (0): registered device video0 [v4l2] saa7146_fops: saa7146 (0): registered device vbi0 [v4l2] av7110: found av7110-0. > tail -f /var/log/messages & > scantv please select your TV norm 0: PAL 1: NTSC nr ? Nov 9 17:21:32 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:32 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 0 please select a frequency table 0: us-bcast 1: us-cable 2: us-cable-hrc 3: japan-bcast 4: japan-cable 5: europe-west 6: europe-east 7: italy 8: newzealand 9: australia 10: ireland 11: france 12: china-bcast 13: southafrica 14: argentina 15: australia-optus 16: russia nr ? 5 [global] freqtab = europe-west [defaults] input = Television norm = PAL ioctl: VIDIOC_S_FREQUENCY(tuner=0;type=ANALOG_TV;frequency=0): Invalid argument scanning channel list europe-west... E2 ( 48.25 MHz): Nov 9 17:21:39 bogumil kernel: av7110: switching DVB mode Nov 9 17:21:39 bogumil kernel: av7110: switching to analog TV Nov 9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 Nov 9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 ??? [unknown (E2)] channel = E2 E3 ( 55.25 MHz): Nov 9 17:21:43 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:43 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 ??? [unknown (E3)] channel = E3 E4 ( 62.25 MHz): Nov 9 17:21:47 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:47 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 ??? [unknown (E4)] channel = E4 S01 ( 69.25 MHz): Nov 9 17:21:51 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:51 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 Nov 9 17:21:53 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000 Nov 9 17:21:53 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000 Thanks for any help. Michael -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
