Am Montag, 8. Dezember 2003 00:32 schrieb Augusto Cardoso: > Hi! > > You may want to try the CVS version of the dvb_kernel. The CVS > version is updated almost daily and it's the latest code. The > Skystar2 2.6B from the CVS should work, but you need to look at the > log to find out if the board was detected correctly or not. >
As I try nearly the same with the same card I drop my mail in here. I have started my machine new and load the driver. Never looked at the logs before (shame on me, see my other mail) >From dmesg: saa7146: register extension 'dvb'. saa7146_core: found saa7146 @ mem e119b000 (revision 1, irq 9) (0x13c2,0x0000). DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3). DVB: registering frontend 0:0 (VES1893)... Siemens/Technotrend/Hauppauge PCI rev1.3 adapter 0 has MAC addr = 00:d0:5c:5b:a5:e1 DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b DVB: AV7111(0) - firmware supports CI link layer interface av7110(0): adac type set to 0 saa7146_fops: saa7146 (0): registered device video0 [v4l2] av7110: found av7110-0. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. saa7146: register extension 'budget dvb /w video in'. usb.c: registered new driver Technotrend/Hauppauge USB-Nova skystar2.c: FlexCopII(rev.130) chip found DVB: registering new adapter (Technisat SkyStar2 driver). probe_tuner: try to attach to Technisat SkyStar2 driver stv0299.c: setup for tuner Samsung TBMU24112IMB DVB: registering frontend 1:0 (STV0299/TSA5059/SL1935 based)... master_xfer: read error ! message 2: flags=0xd11b, addr=0x8960, buf=0x64, len=1024 What my thought was, is that maybe a firmware is needed for the SkyStar2, but i haven't really found something about that topic. Video is working fine allready. I have attached my only cable to the skystar2 and was able to use vdr without a hitch together with my fullfeatured card (transfer mode from skystar2 to ff-card). What doesn't work is SkyDSL, I guess this is because of the master_xfer error ? I use kernel 2.4.22 and dvb-kernel. Steffen -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
