On Friday 16 January 2004 09:35, Steffen Barszus wrote: > Am Donnerstag, 15. Januar 2004 15:31 schrieb Oliver Endriss: > > On Thursday 15 January 2004 14:56, Niklas Peinecke wrote: > > > To settle this issue we have to answer the following question: Is > > > channel switching slower with > > > > > > a) dvb-kernel + kernel 2.6 > > can't try > > > > > > b) dvb-kernel + kernel 2.4 Rev 1.3 card (ALPS BSRV-2 tuner): > It takes longer. FSC Rev1.3 + SS 2.6b. DVB naturally FSC only. But as there > are no recordings ongoing only the FSC should tune as it is the first card. > Channel change time is around 1-2 sec or more in opposite to nearby instantly > if DVB is used. Stability is a lot better with dvb-kernel. I have vdr running > now since nearly 5 days w/o reloading the driver. Normally i had vdr and/or > driver crashing once a day or once in two days. But this can be related to my > new board too or that I'm using a multiswitch with an own PSU. Maybe i should > testdrive DVB with my new setup. > > > > If a) and b) can this be solved? Development has run for some time in > > > dvb-kernel _only_, thus it would be a pity to backport/throw away that. > > > > If there are still problems someone who has these problems should try to > > debug these issues. It should not be too difficult to compare the failing > > frontend driver in DVB and dvb-kernel... > > > > Hope above helps
>From DVB changelog: 2003-07-30 18:58 js * driver/frontends/alps_bsrv2.c: slow-down register writes to avoid tuning problems caused by the speed-up the saa7146 I2C bus I think this has to be done in dvb-kernel, too. Sorry, I don't have a 1.3 card, otherwise I would fix it. Oliver -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.