Hello everybody I have question, maybe anyone can help in that. Many of my customers have SkyStar-1 card (if i am not wrong, full featured card), and they experiencing problem with receiving DVB/IP.
Problem is, when they trying to receive stream, just by setting interface, it is running well at start, but suddently stopping receiving traffic , after while. There is also some feedbacks, that is stopping faster depends of used bandwidth (more bandwidth - more faster it stopped). After setting interface to promisc it is running again, but sure after while stopping again (even if customer leave interface in promisc mode). In default mode i mean - user: hw_sections = 1 encapsulator: section packing turned on (max 100ms delay) If i disable section packing on encap - it is not making any sense when hw_sections = 1. Only one way, how i can make customer work good - it is when i turn off section packing, and he turn off hardware sections filter(?)(hw_sections = 0), but on this way i am loosing bandwidth, because of turned off section packing. Is there any ideas? Btw, there is alternative driver (http://www.linux-dvb.tv/driver/index.html), who working with original Technotrend firmware, it is working good, only one issue - it is unstable on some hardware configurations, and locking up machine completely, and another issue, it is not updated, to work on 2.6. -- Best regards, Denis mailto:[EMAIL PROTECTED] -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
