Solved my own problem... for anyone else with this problem, here is what I was doing wrong:
in all my attempts to get this working I had configure "Bt87x Audio Capture" to compile into the kernel Device Drivers -> Sound -> Advanced Linux Sound Architecture -> PCI devices -> <*> Bt87x Audio Capture This SHOULD NOT be compiled into the kernel if you want the VP-1020 to work! Well now to figure out all this VDR stuff! > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Joseph H. Fry > Sent: Thursday, April 29, 2004 12:13 AM > To: [EMAIL PROTECTED] > Subject: [linux-dvb] dvb_bt8xx: unable to determine DMA core of card 0 > > When loading the modules to get my VP-1020 card running I get this > output in dmesg after running "modprobe dvb_bt8xx" > > bt878: AUDIO driver version 0.0.0 loaded > dvb_bt8xx: unable to determine DMA core of card 0 > attach: checking "monid" > attach: checking "dvi" > attach: checking "vga" > attach: checking "crt2" > attach: checking "bt878 #0 [hw]" > find by pci: checking "bt878 #0 [hw]" > > Then if I try to "modprobe dst" I get nothing, and no entrys are added > under /dev/dvb > > Any chance anyone know's whats causing this... I think the error is the > whole "unable to determine DMA core of card 0"... so I'm curious if it's > something to do with my PCI settings in bios or in the kernel. I read > somewhere that moving the card to a different slot helped someone get > past this problem, but after trying it I had no success. > > Any suggestions would be greatly appreciated! > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux- > dvb" as subject. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
