Hello Jonathan, Responding to myself...
> > > Another problem I'm having (minor in > comparison), is with recognising > > > the V-Stream card - around line 260 in > Christopher Pascoe's > > > cx88-cards.c driver, I attempted to add: > > > > > > -- > > > { "Samsung TDTC9251DH01C Tuner on V-Stream > Card", { 0xDE, 0x17, 0xA6, > > > 0x08}, NULL, > > > 0x50, 0xFC, 0x0F, 0xC2, > > > { 0x31, 0x05 }, { 0x72, 0x49 }, { > 0x64, 0x00 }, { 0x55, 0xB7 }, > > > { { 11, 1, { 0x67, 0x10, 0x23, 0x00, > 0xFF, 0xFF, 0x00, 0xFF, 0x00, > > > 0x40, 0x40 } }, /* AGC */ > > > { 2, 0, { 0xB5, 0x7A } }, > /* ? Reserved register ? */ > > > { 0 } }, > > > 83333, avermedia771_freq_to_tuner, > default_tuner_to_freq, }, I use the following and it works fine for me: { "KWorld/VStream XPert DVB-T", { 0xde, 0x17, 0xa6, 0x08 }, NULL, 0x50, 0x04, 0x0F, 0xC2, { 0x31, 0x05 }, { 0x72, 0x49 }, { 0x64, 0x00 }, { 0x55, 0xB7 }, { { 11, 1, { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, 0x00, 0xFF, 0x00, 0x40, 0x40 } }, /* AGC */ { 2, 0, { 0xB5, 0x7A } }, /* ? Reserved register ? */ { 0 } }, 83333, kworlddvbt_freq_to_tuner, default_tuner_to_freq, }, Note that the pciid offset is 0x04 like the DVICO card. After these changes and loading the driver up I get: [EMAIL PROTECTED]:/usr/share/doc/packages/dvb> tzap -c channels.conf-dvbt-crystal-palace "BBC ONE" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 505833333 Hz video pid 0x0258, audio pid 0x0259 status 00 | signal fd43 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fef5 | snr d0d0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal feee | snr d0d0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff06 | snr d0d0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal fe02 | snr d1d1 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff0f | snr cdcd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff02 | snr d3d3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK until I press ^C. I also get the following in the message log: Jul 10 01:16:06 peeceelinux kernel: cx2388x v4l2 driver version 0.0.4 loaded Jul 10 01:16:06 peeceelinux kernel: cx8800[0]: found at 0000:00:09.0, rev: 5, irq: 9, latency: 32, mmio: 0xd5000000 Jul 10 01:16:06 peeceelinux kernel: cx8800[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-t [card=11,autodetected] Jul 10 01:16:06 peeceelinux kernel: cx8800[0]: i2c register ok Jul 10 01:16:06 peeceelinux kernel: cx8800[0]: registered device video0 [v4l2] Jul 10 01:16:06 peeceelinux kernel: cx8800[0]: registered device vbi0 Jul 10 01:16:06 peeceelinux kernel: cx8800[0]: couldn't register DVB module Jul 10 01:16:06 peeceelinux kernel: cx8800: Initialised TS code, frames_per_irq: 512, frames_to_buffer: 10240 Jul 10 01:16:06 peeceelinux kernel: cx88_register_dvb_module Jul 10 01:16:06 peeceelinux kernel: Trying DVB attach on card de35b000 Jul 10 01:16:06 peeceelinux kernel: DVB: registering new adapter (cx8800[0]). Jul 10 01:16:06 peeceelinux kernel: DVB attached to dev de35b000, dvb: de8adc00 Jul 10 01:16:06 peeceelinux kernel: the eeprom word is 8a617de, cardlist[0] is db0018ac Jul 10 01:16:06 peeceelinux kernel: the eeprom word is 8a617de, cardlist[1] is 8a617de Jul 10 01:16:06 peeceelinux kernel: DVB: registering frontend 0:0 (KWorld/VStream XPert DVB-T)... Jul 10 01:16:19 peeceelinux kernel: Freq: 481666000, offset: -174821, real: 481840821 Jul 10 01:18:16 peeceelinux kernel: Freq: 505666000, offset: -174839, real: 505840839 So I seem to manage to get a lock but nothing more. >From your previous email you got a viterbi and sync too didn't you? I have no idea how to play a DVB stream once things have tuned so I took a guess and tried: [EMAIL PROTECTED]:/usr/share/doc/packages/dvbstream> mplayer /dev/video0 MPlayer 1.0pre4-3.3.3 (C) 2000-2004 MPlayer Team <snip a load of guff> Playing /dev/video0. Cannot seek backward in linear streams! Seek failed Cannot seek backward in linear streams! Seek failed Cannot seek backward in linear streams! Seek failed Cannot seek backward in linear streams! Seek failed Cannot seek backward in linear streams! Seek failed MPlayer interrupted by signal 2 in module: demux_open [EMAIL PROTECTED]:/usr/share/doc/packages/dvbstream> So no data output... yet. Does anyone have any ideas? Regards, Soyeb ===== email: [EMAIL PROTECTED] www: http://soyeb.homeip.net work: http://www.tertio.com )