Hi, folks
This patch hopefully makes the module work.
It assumes the board does not support FM radio
and applies to my personal repository.
Please test whatever you can:
- DVB-T
- analog TV
- CVBS and S-VIDEO input
Please note that this does not include the changes
for the alsa driver i mentioned. You will still need
to set the sound recording source manually.
Best regards
Hartmut
diff -uNr v4l-dvb/linux/drivers/media/dvb/frontends/tda1004x.c v4l-dvb.wk/linux/drivers/media/dvb/frontends/tda1004x.c
--- v4l-dvb/linux/drivers/media/dvb/frontends/tda1004x.c 2006-10-29 01:53:03.000000000 +0200
+++ v4l-dvb.wk/linux/drivers/media/dvb/frontends/tda1004x.c 2006-11-02 00:58:12.000000000 +0100
@@ -648,18 +648,24 @@
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
break;
- case TDA10046_AGC_TDA827X:
+ case TDA10046_AGC_TDA827X_GP11:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
break;
- case TDA10046_AGC_TDA827X_GPL:
+ case TDA10046_AGC_TDA827X_GP00:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
break;
+ case TDA10046_AGC_TDA827X_GP01:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+ break;
}
tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
diff -uNr v4l-dvb/linux/drivers/media/dvb/frontends/tda1004x.h v4l-dvb.wk/linux/drivers/media/dvb/frontends/tda1004x.h
--- v4l-dvb/linux/drivers/media/dvb/frontends/tda1004x.h 2006-10-29 01:53:03.000000000 +0200
+++ v4l-dvb.wk/linux/drivers/media/dvb/frontends/tda1004x.h 2006-11-02 00:58:05.000000000 +0100
@@ -35,8 +35,9 @@
TDA10046_AGC_DEFAULT, /* original configuration */
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
- TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
- TDA10046_AGC_TDA827X_GPL, /* same as above, but GPIOs 0 */
+ TDA10046_AGC_TDA827X_GP11, /* IF AGC only, special setup for tda827x */
+ TDA10046_AGC_TDA827X_GP00, /* same as above, but GPIOs 0 */
+ TDA10046_AGC_TDA827X_GP01, /* same as above, but GPIO3=0 GPIO1=1*/
};
enum tda10046_if {
diff -uNr v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c v4l-dvb.wk/linux/drivers/media/video/saa7134/saa7134-cards.c
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c 2006-10-30 23:57:11.000000000 +0100
+++ v4l-dvb.wk/linux/drivers/media/video/saa7134/saa7134-cards.c 2006-11-02 01:13:34.000000000 +0100
@@ -3166,6 +3166,29 @@
.amux = LINE2,
}},
},
+ [SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
+ .name = "Terratec Cinergy HT PCMCIA",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3793,6 +3816,12 @@
.subdevice = 0x4876,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x153b,
+ .subdevice = 0x1172,
+ .driver_data = SAA7134_BOARD_CINERGY_HT_PCMCIA,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -4154,6 +4183,14 @@
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ /* make the tda10046 find its eeprom */
+ {
+ u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ break;
case SAA7134_BOARD_KWORLD_ATSC110:
{
/* enable tuner */
diff -uNr v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c v4l-dvb.wk/linux/drivers/media/video/saa7134/saa7134-dvb.c
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c 2006-10-30 23:57:11.000000000 +0100
+++ v4l-dvb.wk/linux/drivers/media/video/saa7134/saa7134-dvb.c 2006-11-02 01:09:21.000000000 +0100
@@ -678,7 +678,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -882,7 +882,40 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = NULL,
+};
+/* ------------------------------------------------------------------ */
+
+static int philips_tiger_s_tuner_init(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x62};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static int philips_tiger_s_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ philips_tda827xa_tuner_sleep( 0x61, fe);
+ return 0;
+}
+
+static struct tda1004x_config philips_tiger_s_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GP01,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -894,7 +927,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = philips_tda1004x_request_firmware,
};
@@ -906,7 +939,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = philips_tda1004x_request_firmware,
};
@@ -958,7 +991,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -995,7 +1028,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1020,7 +1053,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1065,7 +1098,7 @@
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
@@ -1340,6 +1373,18 @@
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &philips_tiger_s_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_s_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_s_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+
+ }
+ break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
break;
diff -uNr v4l-dvb/linux/drivers/media/video/saa7134/saa7134.h v4l-dvb.wk/linux/drivers/media/video/saa7134/saa7134.h
--- v4l-dvb/linux/drivers/media/video/saa7134/saa7134.h 2006-10-30 23:57:11.000000000 +0100
+++ v4l-dvb.wk/linux/drivers/media/video/saa7134/saa7134.h 2006-11-01 00:37:23.000000000 +0100
@@ -239,6 +239,7 @@
#define SAA7134_BOARD_PINNACLE_PCTV_310i 101
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103
+#define SAA7134_BOARD_CINERGY_HT_PCMCIA 104
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
