I had a job getting sound to work properly (without and clicking, delays or other resampling errors) from sox or arecord & aplay.
eventually this worked:- mplayer tv://25 -tv driver=v4l2:device=/dev/video0:norm=PAL-I:chanlist=europe-west:\ alsa:adevice=hw.2,0:amode=1:audiorate=48000:volume=100:\ immediatemode=0:buffersize=32 -aspect 16:9 Where My SkyBox is tuned to channel 25, its /dev/video0 its PAL-I (europe-west) and the cx88_alsa device is card2 sub 0 (ie hw.2,0). I want sound in stereo (amode=1) at 48k. I had problems with buffers overflowing, so I set the buffersize to twice what was needed and the sound is now perfect. My SkyBox is setup for a 16:9 screen, even though PAL-I isn't so the -aspect 16:9 corrects the screen size. I've be curious to know what command you were using to pass through the audio? Is there a better way than mplayer? I couldn't get sox or arecord/aplay to work satisfactorly. Simon _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb