Am Montag, den 15.01.2007, 17:55 -0500 schrieb Michael Krufky:
> Hartmut Hackmann wrote:
> > Hi, Giorgio
> >
> > Giorgio Moscardi schrieb:
> >> Alle 15:25, giovedì 4 gennaio 2007, Giorgio Moscardi ha scritto:
> >>> Hi,
> >>> I've just subscribed to this mailing list, in the hope of getting my TV
> >>> card working.
> >>>
> >>> It's a Terratec Cinergy HT PCI, I've set up a page on the wiki for it:
> >>> http://linuxtv.org/v4lwiki/index.php/Terratec_Cinergy_HT_PCI. It's a
> >>> hybrid
> >>> card, and it supports both analog and DVB-T. I will also provide pictures
> >>> of it.
> >> Well, I must say I was expecting some replies to my mail... Nobody is
> >> interested in adding support for this new card with what - I figure - will
> >> just be a little effort?
> >
> > This might be a task for me but sorry, i am currently very busy.
>
> Hartmut,
>
> I helped a user with this card in irc, and I had him apply this patch:
>
> http://linuxtv.org/~mkrufky/pending/terratec-cinergy-ht-pci.patch
>
> ...It seemed to work for him correctly, except that the user had some trouble
> scanning for digital channels. The user had full functionality in analog
> mode,
> but no dvb, yet. (I think it was his signal, because he couldn't make
> it work in windows, either)
>
> I didn't want to commit the patch without knowing for sure. Maybe Georgio
> would be willing to test this.
>
> Unfortunately, I don't recall the name of the original tester.
>
> If this works for Georgio, then I suggest removing the "PCMCIA" from the text
> name of card #105 --- the card setup *seems* to be identical, but there is
> only so much that I can tell without trying myself.
>
> If you decide to apply this patch, Hartmut, then here is my sign-off:
>
> Signed-off-by: Michael Krufky <[EMAIL PROTECTED]>
>
Hi,
static int cinergy_ht_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
static u8 data[] = { 0x3c, 0x33, 0x62};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof
(data)};
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
but reportedly Giogio uses philips_tiger_tuner_init on the medion quad.
static int philips_tiger_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
static u8 data[] = { 0x3c, 0x33, 0x6a};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof
(data)};
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
The cinergy pcmcia is only useful for the firmware upload.
Cheers,
Hermann
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
