Hello,
I've received a HVR-1300 MCE edition. However, I'm unable to get it working.
On boot time everything looks ok: it detects the correct board (see below in
the dmesg). However, the moment I try to run e.g . the radio, I get these
messages:
tda9887 2-0043: i2c i/o error: rc == -121 (should be 4)
tda9887 2-0043: i2c i/o error: rc == -121 (should be 4)
tuner 2-0061: i2c i/o error: rc == -121 (should be 4)
Is there a difference between the MCE and non MCE edition ?
If you need other info, please ask...
Thanks
Start------------------------- dmesg
---------------------------------------------------------------------
Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
usb 2-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft Wireless Optical Desktop� 1.00 as
/class/input/input2
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop�
1.00] on usb-0000:00:0b.0-3
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) ->
IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbfff000-fbfff7ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:10.1 to 64
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) ->
IRQ 16
PCI: Setting latency timer of device 0000:00: 05.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8776 Mon Oct 16
21:53:43 PDT 2006
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) ->
IRQ 17
CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300
DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
tveeprom 2-0050: Hauppauge model 96559, rev C3A0, serial# 736865
tveeprom 2-0050: MAC address is 00-0D-FE-0B-3E-61
tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)
tveeprom 2-0050: audio processor is CX882 (idx 33)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has radio, has no IR remote
cx88[0]: hauppauge eeprom: model=96559
input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input3
cx88[0]/0: found at 0000:04:09.0, rev: 5, irq: 17, latency: 32, mmio:
0xfa000000
tuner 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 2-0063: chip found @ 0xc6 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x blackbird driver version 0.0.6 loaded
End--------------------------- dmesg
-------------------------------------------------------------------
START------------------------- lspci -vv output
---------------------------------------------------------------------
04:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9600
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:09.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9600
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9600
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
END--------------------------- lspci -vv output
---------------------------------------------------------------------
--
---
Manfred Haelters
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
