Is there any way to lock down or predict what device my CX-88 IR input
class is going to use.
My device event# seems to change after every reboot which means I need
to manual re-configure my lircd device settings
eg
input: cx88 IR (digitalnow DNTV Live! as /class/input/input3
which means I need to set my config as follows
cat /etc/sysconfig/lircd
LIRCD_OPTIONS="-H dev/input -d /dev/input/event3"
After a reboot with no h/w changes this swithes to input3/event3
This is driving me nuts as I have to check this after each reboot to see
if this has changed.
Paul
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb