Sid Boyce wrote: > Sid Boyce wrote: >> Michael Krufky wrote: >>> Sid Boyce wrote: >>>> # modprobe cx88-dvb >>>> FATAL: Error inserting cx88_dvb >>>> (/lib/modules/2.6.22-rc3-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko): >>>> No such device >>>> >>>> dmesg spits this out after trying "modprobe cx88-dvb" >>>> cx2388x dvb driver version 0.0.6 loaded >>>> cx8802_register_driver() ->registering driver type=dvb access=shared >>>> # l /dev/vbi* >>>> lrwxrwxrwx 1 root root 4 2007-05-30 06:24 /dev/vbi -> vbi0 >>>> crw-rw---- 1 root video 81, 224 2007-05-30 06:24 /dev/vbi0 >>>> crw-rw---- 1 root video 81, 225 2007-05-30 06:24 /dev/vbi1 >>>> /dev/dvb is not created. >>>> >>>> From dmesg >>>> ============ >>>> cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded >>>> cx2388x v4l2 driver version 0.0.6 loaded >>>> >>>> x2388x dvb driver version 0.0.6 loaded >>>> cx8802_register_driver() ->registering driver type=dvb access=shared >>>> >>>> ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, >>>> low) -> IRQ 18 >>>> CORE cx88[0]: subsystem: 17de:08a4, board: KWorld/VStream XPert >>>> DVB-T [card=14,insmod option] >>>> TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe >>>> >>>> cx88[0]: Test OK >>>> >>>> input: cx88 IR (KWorld/VStream XPert D as /class/input/input5 >>>> cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 18, latency: 32, >>>> mmio: 0xfb000000 >>>> cx88[0]/0: registered device video1 [v4l2] >>>> cx88[0]/0: registered device vbi0 >>>> ACPI: PCI Interrupt 0000:01:08.2[A] -> Link [APC3] -> GSI 18 (level, >>>> low) -> IRQ 18 >>>> cx88[0]/0: found at 0000:01:08.2, rev: 5, irq: 18, latency: 32, >>>> mmio: 0xfa000000 >>>> cx88[0]/0: registered device video2 [v4l2] >>>> cx88[0]/0: registered device vbi1 >>>> >>>> cx2388x dvb driver version 0.0.6 loaded >>>> cx8802_register_driver() ->registering driver type=dvb access=shared >>>> >>>> cx2388x dvb driver version 0.0.6 loaded >>>> cx8802_register_driver() ->registering driver type=dvb access=shared >>>> cx2388x dvb driver version 0.0.6 loaded >>>> cx8802_register_driver() ->registering driver type=dvb access=shared >>>> >>>> # lsmod|grep cx8 >>>> cx8800 54508 0 >>>> cx8802 36868 0 >>>> cx88xx 88228 2 cx8800,cx8802 >>>> ir_common 54020 1 cx88xx >>>> i2c_algo_bit 23428 1 cx88xx >>>> tveeprom 34832 1 cx88xx >>>> videodev 45056 3 gspca,cx8800,cx88xx >>>> compat_ioctl32 25600 1 cx8800 >>>> v4l2_common 36736 4 cx8800,cx88xx,videodev,compat_ioctl32 >>>> video_buf 43524 4 cx8800,cx8802,cx88xx,video_buf_dvb >>>> btcx_risc 21896 3 cx8800,cx8802,cx88xx >>>> i2c_core 44032 12 >>>> it87,i2c_isa,or51132,mt352,cx22702,cx22700,nvidia,cx88xx,i2c_algo_bit,tveeprom,dvb_pll,i2c_nforce2 >>>> >>>> >>>> >>>> I moved this card from a x86 box to this 64x2 AM2 box and the >>>> following files have the same contents. udev the same as on the x86 >>>> box. This is definitely a KWorld/VStream XPert DVB-T card which I >>>> had working for over one year at least. Kernel is 2.6.22-rc3, same >>>> problem with 2.6.22-rc2-git7. I haven't checked it in a few weeks on >>>> the x86 box, but it was OK on earlier 2.6.22-rc kernels. >>>> >>>> # less /etc/sysconfig/hardware/hwcfg-bus-pci-0000\:01\:08.0 >>>> # YaST configured TV card >>>> # 75Hn.ANrE4vYza54:CX23880/1/2/3 PCI Video and Audio Decoder >>>> MODULE='cx88-dvb' >>>> STARTMODE='auto' >>>> >>>> # less /etc/modprobe.d/tv >>>> >>>> alias char-major-81 videodev >>>> options i2c-algo-bit bit_test=1 >>>> # YaST configured TV card >>>> # 75Hn.ANrE4vYza54:CX23880/1/2/3 PCI Video and Audio Decoder >>>> alias char-major-81-0 cx8800 >>>> alias char-major-81-1 off >>>> alias char-major-81-2 off >>>> alias char-major-81-3 off >>>> >>>> I added this to modprobe.conf.local to get the card recognised. >>>> # less /etc/modprobe.conf.local >>>> # >>>> # please add local extensions to this file >>>> # >>>> options cx88xx card=14 >>>> >>>> from lspci -vvv >>>> =============== >>>> 01:08.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI >>>> Video and Audio Decoder (rev 05) >>>> Subsystem: KWorld Computer Co. Ltd. Unknown device 08a4 >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>> ParErr- Stepping- SERR- FastB2B- >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >>>> >TAbort- <TAbort- <MAbort- >SERR- <PERR+ >>>> Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 >>>> bytes >>>> Interrupt: pin A routed to IRQ 18 >>>> Region 0: Memory at fb000000 (32-bit, non-prefetchable) >>>> [size=16M] >>>> Capabilities: [44] Vital Product Data >>>> Capabilities: [4c] Power Management version 0 >>>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>> >>>> 01:08.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and >>>> Audio Decoder (rev 05) >>>> Subsystem: KWorld Computer Co. Ltd. Unknown device 08a4 >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>> ParErr- Stepping- SERR- FastB2B- >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >>>> >TAbort- <TAbort- <MAbort- >SERR- <PERR+ >>>> Latency: 32 (1000ns min, 22000ns max), Cache Line Size: 32 >>>> bytes >>>> Interrupt: pin A routed to IRQ 18 >>>> Region 0: Memory at fa000000 (32-bit, non-prefetchable) >>>> [size=16M] >>>> Capabilities: [4c] Power Management version 0 >>>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA >>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>> >>>> Any ideas? >>>> Thanks and Regards >>>> Sid. >>> >>> What happens if you try card=43 instead of card=14? >>> >>> You can't expect your card to 'just work' like this -- clearly we >>> will have to >>> add an patch to the driver to autodetect your device, as it does have >>> a unique >>> PCI subsystem ID. >>> >>> Let me know what card=43 does, then we can try some other things. >>> >>> Good Luck, >>> >>> Mike >>> >>> >>> >> It was being autodected for around 2 years and until quite recently, >> on the x86 box. January 20th. and 24th., but not in the following >> message log. It doesn't appear in 20070410 or 20070415. Can't figure >> out which kernel was in use then as they have been removed, but I >> think up to 2.6.21-rc and the earliest I have around is 2007-05-03 >> 22:04 2.6.21-git4. >> # bzcat /var/log/messages-20070403.bz2 |less >> Jan 20 03:37:45 barrabas kernel: CORE cx88[0]: subsystem: 17de:08a6, >> board: KWorld/VStream XPert DVB-T [card=14] >> Jan 20 03:37:45 barrabas kernel: cx88[0]/2: cx2388x based dvb card >> Jan 20 03:37:45 barrabas kernel: DVB: registering new adapter (cx88[0]). >> Jan 20 03:37:45 barrabas kernel: DVB: registering frontend 0 (Zarlink >> MT352 DVB-T)... >> Ditto for 24th. January. >> >> I shall try card 43 again on reboot, stuff below didn't work out. >> # rmmod cx8800 >> # rmmod cx8802 >> # rmmod ir_common >> ERROR: Module ir_common is in use by cx88xx >> # rmmod cx88xx >> # lsmod|grep cx8 >> # modprobe cx88-dvb >> FATAL: Error inserting cx88_dvb >> (/lib/modules/2.6.22-rc3-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko): >> No such device >> tindog:/ftp/May07 # lsmod|grep cx8 >> cx8802 36868 0 >> cx88xx 88228 1 cx8802 >> ir_common 54020 1 cx88xx >> i2c_algo_bit 23428 1 cx88xx >> tveeprom 34832 1 cx88xx >> videodev 45056 2 cx88xx,gspca >> v4l2_common 36736 3 cx88xx,videodev,compat_ioctl32 >> video_buf 43524 3 cx8802,cx88xx,video_buf_dvb >> btcx_risc 21896 2 cx8802,cx88xx >> i2c_core 44032 12 >> cx88xx,it87,i2c_isa,or51132,mt352,cx22702,cx22700,nvidia,i2c_algo_bit,tveeprom,dvb_pll,i2c_nforce2 >> >> >> >> Regards >> Sid. > No luck with card=43 either, kernel 2.6.22-rc3-git5. > Regards > Sid. >
Sid, There's no way that this card could have autodetected in an earlier kernel, unless you had a distro-patched kernel, in which the distro had added support for your card without syncing with upstream v4l / dvb ... There simply is no card autodetection entry for 17de:08a6. Which distro are / were you running, and were you running any special kernel flavor? -Mike _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb