On Mon, 2007-07-30 at 18:30 +0200, Patrick Boettcher wrote: > Dear all, > > Can all of you using a dib0700-based-design with problem please try the > following firmware > > http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-03-pre1.fw > > and the latest drivers from > > http://linuxtv.org/hg/~pb/v4l-dvb/ > > to see whether you have still problems.
[ 29.242352] dib0700: loaded with support for 5 different device-types [ 29.242469] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 29.242500] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 29.242639] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 29.331007] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 29.360836] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 29.361640] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 29.363979] MT2060: successfully identified (IF1 = 1220) [ 29.855299] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 29.855471] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 29.858047] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 29.860044] MT2060: successfully identified (IF1 = 1220) [ 29.909967] NET: Registered protocol family 17 [ 30.369119] Unable to handle kernel paging request at ffff810044b63c1c RIP: [ 30.369124] [<ffffffff883169bd>] :dvb_usb:dvb_usb_remote_init+0x13d/0x270 [ 30.369134] PGD 8063 PUD 0 [ 30.369138] Oops: 0002 [1] SMP [ 30.369141] CPU 0 [ 30.369143] Modules linked in: af_packet mt2060 snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq wlan_scan_sta dvb_usb_dib0700 dib7000p dib7000m dvb_usb sr_mod cdrom ath_rate_sample dvb_core usb_storage dib3000mc dibx000_common dib0070 usbhid ftdi_sio snd_timer snd_seq_device ide_core hid libusual snd usbserial i2c_core pcspkr soundcore serio_raw ath_pci wlan ath_hal(P) parport_pc parport snd_page_alloc psmouse shpchp pci_hotplug iTCO_wdt iTCO_vendor_support intel_agp evdev ext3 jbd mbcache sg sd_mod pata_marvell ohci1394 ieee1394 ahci ata_generic libata scsi_mod uhci_hcd ehci_hcd usbcore e1000 thermal processor fan capability commoncap [ 30.369194] Pid: 3591, comm: modprobe Tainted: P 2.6.22-8-generic #1 [ 30.369197] RIP: 0010:[<ffffffff883169bd>] [<ffffffff883169bd>] :dvb_usb:dvb_usb_remote_init+0x13d/0x270 [ 30.369204] RSP: 0018:ffff8100371cbc08 EFLAGS: 00010282 [ 30.369207] RAX: 000000006e6c5f65 RBX: ffff810038c14000 RCX: ffff810036e8b020 [ 30.369211] RDX: ffff81003b482800 RSI: ffffffff80500102 RDI: ffff810036e8b6c0 [ 30.369214] RBP: 00000000000003b0 R08: 0000000000000000 R09: ffff810036e8b000 [ 30.369217] R10: 0000000000000000 R11: 0000000000000001 R12: ffff810036e8b000 [ 30.369220] R13: 0000000000000076 R14: 0000000000000076 R15: 0000000000000002 [ 30.369223] FS: 00002b5b8b1456e0(0000) GS:ffffffff80560000(0000) knlGS:0000000000000000 [ 30.369226] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 30.369229] CR2: ffff810044b63c1c CR3: 000000003777e000 CR4: 00000000000006e0 [ 30.369233] Process modprobe (pid: 3591, threadinfo ffff8100371ca000, task ffff81003b2526e0) [ 30.369235] Stack: 0000000000000001 ffffffff8832a292 ffff810038c153d0 0000000000000000 [ 30.369242] ffff810038c159e0 ffff810038c14000 ffff810038c140e0 ffffffff88315af8 [ 30.369247] 000000000000a1ff 0000000000000000 ffffffff88330a00 ffff81003c5a4800 [ 30.369252] Call Trace: [ 30.369259] [<ffffffff8832a292>] :dvb_usb_dib0700:bristol_tuner_attach+0x62/0xd0 [ 30.369266] [<ffffffff88315af8>] :dvb_usb:dvb_usb_device_init+0x578/0x650 [ 30.369276] [<ffffffff88329666>] :dvb_usb_dib0700:dib0700_probe+0x46/0x60 [ 30.369294] [<ffffffff8804a9e1>] :usbcore:usb_probe_interface+0xd1/0x120 [ 30.369304] [<ffffffff80391393>] driver_probe_device+0xa3/0x1b0 [ 30.369319] [<ffffffff80391659>] __driver_attach+0xc9/0xd0 [ 30.369322] [<ffffffff80391590>] __driver_attach+0x0/0xd0 [ 30.369325] [<ffffffff8039056d>] bus_for_each_dev+0x4d/0x80 [ 30.369329] [<ffffffff803909cf>] bus_add_driver+0xaf/0x1f0 [ 30.369338] [<ffffffff8804a3b9>] :usbcore:usb_register_driver+0xa9/0x120 [ 30.369343] [<ffffffff8803f02f>] :dvb_usb_dib0700:dib0700_module_init+0x2f/0x49 [ 30.369347] [<ffffffff80256e5b>] sys_init_module+0x19b/0x19b0 [ 30.369355] [<ffffffff803257d1>] __up_write+0x21/0x130 [ 30.369360] [<ffffffff80209e8e>] system_call+0x7e/0x83 [ 30.369364] [ 30.369365] [ 30.369365] Code: f0 41 0f ab 44 24 30 49 83 c5 01 48 83 c5 08 41 8d 46 01 39 [ 30.369372] RIP [<ffffffff883169bd>] :dvb_usb:dvb_usb_remote_init+0x13d/0x270 [ 30.369376] RSP <ffff8100371cbc08> [ 30.369378] CR2: ffff810044b63c1c I'm on Ubuntu Gutsy Gibbon, 2.6.22, 64 bit Intel Core 2 Duo. More details on the machine's content here: http://www.youplala.net/linux/home-theater-pc/ Full logs and other details available on request _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb