On 9/21/07, Thierry Lelegard <[EMAIL PROTECTED]> wrote: > Hello, > > Unfortunately, after just one single day, the problem occured again. > Note that this is not 24 hours of continuous TV watching. This is a test > lab and I stop and start the tests quite frequently. > > From dmesg: usb 8-1: USB disconnect, address 2 > > After the problem, the command 'lsusb' hangs. I forgot to mention that > in my previous report. A 'kill -9' of the lsusb process does not remove > the process. Its state is 'D' using ps (must hang somewhere in the kernel). > > I cannot unload the DVB modules. Under v4l source tree: > > $ make unload > scripts/rmmod.pl unload > found 209 modules > /sbin/rmmod dib3000mc > ERROR: Module dib3000mc is in use > /sbin/rmmod dibx000_common > ERROR: Module dibx000_common is in use by dib3000mc > /sbin/rmmod mt2060 > ERROR: Module mt2060 is in use > $ > > I found no other solution than rebooting the system again ! >
Do you see any further information with dmesg? Markus _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb