Hello

my friend tried to run TT 3200 on Manu's drivers. But there's some problem
Error 
"frontend_init: No LNBP21 found!".  Could you clarify it.

So, hardware are

TТ3200
motherboard Asus Р4С800 (chipset Intel875P)
+ Р4 2400 (socket 478 )
+ debian stable with kernel 2.6.18-4-686
headers /usr/src/linux-headers-2.6.18-4-686

debian:/opt/manu_3200# cd multiproto
debian:/opt/manu_3200/multiproto# make
.............
Preparing to compile for kernel version 2.6.18

***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.

If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.

Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:

cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install

Please see your distro's web site for instructions to build a new kernel.

VIDEO_PLANB: Requires at least kernel 2.6.99
VIDEO_CAFE_CCIC: Requires at least kernel 2.6.19
...............

  CC [M]  /opt/manu_3200/multiproto/v4l/stb0899_drv.o
/opt/manu_3200/multiproto/v4l/stb0899_drv.c: In function 'stb0899_sleep':
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:874: warning: unused variable 'reg'
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:873: warning: unused variable 
'state'
/opt/manu_3200/multiproto/v4l/stb0899_drv.c: In function 'stb0899_track':
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1880: warning: unused variable 
'internal'
/opt/manu_3200/multiproto/v4l/stb0899_drv.c: At top level:
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1672: warning: 
'stb0899_track_carrier' defined but not used
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1689: warning: 'stb0899_get_ifagc' 
defined but not used
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1706: warning: 'stb0899_get_s1fec' 
defined but not used
/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1734: warning: 'stb0899_get_modcod' 
defined but not used
..........
found 203 modules
make[1]: Leaving directory `/opt/manu_3200/multiproto/v4l'


there's some problem with VIDEO_PLANB and VIDEO_CAFE_CCIC.


dmesg

ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
saa7146: register extension 'budget_ci dvb'.
intel8x0_measure_ac97_clock: measured 56080 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 201
saa7146: found saa7146 @ mem e09a0400 (revision 1, irq 201) (0x13c2,0x1019).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
Intel 810 + AC97 Audio, version 1.01, 23:26:00 May  9 2007
adapter has MAC addr = 00:d0:5c:0b:ab:0e
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
_stb0899_read_reg: Reg=[0xf000], data=81
stb0899_get_dev_id: ID reg=[0x81]
stb0899_get_dev_id: Device ID=[8], Release=[1]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], 
Offset=[0xf334], Data=[0x454d4531]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], 
Offset=[0xf33c], Data=[0x01010101]
stb0899_get_dev_id: Demodulator Core ID=[EME1], Version=[16843009]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], 
Offset=[0xfa2c], Data=[0x47454331]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], 
Offset=[0xfa34], Data=[0x01010101]
stb0899_get_dev_id: FEC Core ID=[GEC1], Version=[16843009]
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
frontend_init: No LNBP21 found!
stb0899_release: Release Frontend
budget-ci: A frontend driver was not found for device 1131/7146 subsystem 
13c2/1019

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to