I just purchase the PCTV HD Ultimate Stick. I decided upon this since it
supported clear QAM and had flash space for recording to the stick in addition
to the hardrive. I read that the PCTV HD Pro Stick was supported with the
latest Experimental build based on the em2883 chipset. I took the risk and
went with the Ultimate instead of the Pro.
I have download the latest DVB Experimental from the Mercurial repository at
http://mcentral.de/hg/~mrec/v4l-dvb-experimental
I compiled the drivers and installed them and did the modprobe on em28xx.
The Kernel Ring buffer had the following:
[ 191.298763] Linux video capture interface: v2.00
[ 191.321285] em28xx v4l2 driver version 0.0.1 loaded
[ 191.321874] usbcore: registered new interface driver em28xx
I then plugged in the PCTV USB ultimate stick and it found the flash drive
and readonly memory on the card used for installing the XP and Vista software
(ugh!!!) but never found the actual PCTV USB device.
After plugging in the USB device the following was displayed in the Kernel
Ring buffer:
[ 233.604404] usb 3-3: new high speed USB device using ehci_hcd and
address 2
[ 233.671309] usb 3-3: configuration #1 chosen from 1 choice
[ 233.671487] hub 3-3:1.0: USB hub found
[ 233.671649] hub 3-3:1.0: 4 ports detected
[ 233.824406] usb 3-3.1: new high speed USB device using ehci_hcd and
address 3
[ 233.872796] usb 3-3.1: configuration #1 chosen from 1 choice
[ 233.978809] usbcore: registered new interface driver libusual
[ 234.024864] Initializing USB Mass Storage driver...
[ 234.025175] scsi0 : SCSI emulation for USB Mass Storage devices
[ 234.025733] usb-storage: device found at 3
[ 234.025739] usb-storage: waiting for device to settle before scanning
[ 234.025255] usbcore: registered new interface driver usb-storage
[ 234.025260] USB Mass Storage support registered.
[ 236.525005] usb-storage: device scan complete
[ 236.525668] scsi 0:0:0:0: Direct-Access GENERIC TORAGE
2269 PQ: 0 ANSI: 0
[ 236.526282] scsi 0:0:0:1: CD-ROM GENERIC TORAGE
2269 PQ: 0 ANSI: 0 CCS
[ 236.576309] sd 0:0:0:0: [sda] 2027520 512-byte hardware sectors (1038
MB)
[ 236.577248] sd 0:0:0:0: [sda] Write Protect is off
[ 236.577253] sd 0:0:0:0: [sda] Mode Sense: 02 00 00 00
[ 236.577256] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 236.578928] sd 0:0:0:0: [sda] 2027520 512-byte hardware sectors (1038
MB)
[ 236.579804] sd 0:0:0:0: [sda] Write Protect is off
[ 236.579808] sd 0:0:0:0: [sda] Mode Sense: 02 00 00 00
[ 236.579810] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 236.579814] sda:<3>Buffer I/O error on device sda, logical block 0
[ 236.580587] Buffer I/O error on device sda, logical block 0
[ 236.580772] Buffer I/O error on device sda, logical block 0
[ 236.580951] Buffer I/O error on device sda, logical block 0
[ 236.581128] Buffer I/O error on device sda, logical block 0
[ 236.581135] ldm_validate_partition_table(): Disk read failed.
[ 236.581471] Buffer I/O error on device sda, logical block 0
[ 236.581650] Buffer I/O error on device sda, logical block 0
[ 236.581828] Buffer I/O error on device sda, logical block 0
[ 236.582006] Buffer I/O error on device sda, logical block 0
[ 236.582013] Dev sda: unable to read RDB block 0
[ 236.582349] Buffer I/O error on device sda, logical block 0
[ 236.582559] unable to read partition table
[ 236.582957] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 236.595599] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 236.595716] sr 0:0:0:1: Attached scsi CD-ROM sr0
[ 236.610971] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 236.611247] sr 0:0:0:1: Attached scsi generic sg1 type 5
[ 236.758222] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 236.894038] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 236.989461] sd 0:0:0:0: [sda] 2027520 512-byte hardware sectors (1038
MB)
[ 237.061904] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 237.158851] sd 0:0:0:0: [sda] Write Protect is off
[ 237.158860] sd 0:0:0:0: [sda] Mode Sense: 02 00 00 00
[ 237.158865] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 237.233777] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 237.405648] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 237.577529] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 237.675053] sd 0:0:0:0: [sda] 2027520 512-byte hardware sectors (1038
MB)
[ 237.749401] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 237.846355] sd 0:0:0:0: [sda] Write Protect is off
[ 237.846366] sd 0:0:0:0: [sda] Mode Sense: 02 00 00 00
[ 237.846370] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 237.846376] sda:<6>usb 3-3.1: reset high speed USB device using
ehci_hcd and address 3
[ 238.033050]
[ 238.144987] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 238.436764] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 238.600654] usb 3-3.2: new high speed USB device using ehci_hcd and
address 4
[ 238.700194] usb 3-3.2: configuration #1 chosen from 1 choice
[ 238.764519] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 238.932403] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 239.100283] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 239.268035] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 239.435912] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 239.603799] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 239.771678] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 239.947543] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 240.115425] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 240.283308] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 240.451179] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 240.618929] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 240.786808] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 240.954690] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 241.122566] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 241.334404] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 241.502282] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 241.670161] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 241.837929] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 242.005797] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 242.173683] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 242.341554] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 242.509426] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 243.176809] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 243.344804] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 243.512563] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 243.680451] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 243.836189] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 243.920130] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.004068] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.088008] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.177948] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.261896] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.345839] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.429720] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.513664] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.597607] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.681551] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.765497] usb 3-3.1: reset high speed USB device using ehci_hcd and
address 3
[ 244.844055] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 244.844867] ISOFS: changing to secondary root
Any chance that there will be support for this newly released USB stick ?
On Vista, the following information was available from device manager:
Pinnacle PCTV 880e
Hardware Ids
USB\VID_2304&PID_0233&REV_0110
USB\VID_2304&PID_0233
Thanks in advance for any replies,
Jeff
PS - Running Ubuntu 64bit 7.10
---------------------------------
Never miss a thing. Make Yahoo your homepage._______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
