Diego wrote: > Yep hangs when got errors in picture but its rare... Many DVB-sticks has problems when signal goes weak, maybe it is issue that can be handled and fixed with driver. I haven't looked this more...
> About changing channels perhaps its that (low signal) because some channels > change fast > and others no, then display some picture errors but after few seconds the > image its > fine, i experience video freeze too (no audio freeze) sometimes but perhaps > its the same > problem with weak signal. Driver uses automatic parameter detection currently, only bandwidth and frequency are set from userspace application. I will check this later today and add support for manual & automatic demodulator parameters settings (TPS). > On boot up if i have the dvbt plugged that load driver but not work. > "klear" says can't open dvb display. Frontend does not attach as it should. Can be fixed easily. I will fix this also. > I apply the patch agains agains v4l, perhaps i make something wrong on patch > the kernel > 2.6.22 but seems that not the problem. > > Adjunt the two dmesg after patch v4l: > dvb plugged on boot (not work) > dvb attached after boot (work) I still did not understand why it (system) attach this driver twice. regards Antti -- http://palosaari.fi _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
