Hello! I have browsed a half year back in archives but didn't find any solution to this. I have setup a Hauppauge Nova-T 500 PCI under Kubunt 7.10using v4l-dvb from svn 2007-12-07. Every day I get I2C read/write failed errors and need to reload the module (dvb-usb-dib0700). In worst case the module won't reload because they are in use (but no program is running, mythbackend stopped, etc). Last time this (as in "in use") happened was when I seeked (right arrow) when playing /dev/dvb/adapter0/dvr0 in mplayer after tzap -r. Some info:
[EMAIL PROTECTED]:~$ dmesg | grep -i "mt2060\|dvb" [ 32.644274] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 32.644305] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 32.644422] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 33.000139] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 33.045331] MT2060: successfully identified (IF1 = 1220) [ 33.603278] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 33.603459] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 33.609153] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 33.613900] MT2060: successfully identified (IF1 = 1220) [ 34.169059] input: IR-receiver inside an USB DVB receiver as /class/input/input6 [ 34.169099] dvb-usb: schedule remote query interval to 150 msecs. [ 34.169103] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 34.169363] usbcore: registered new interface driver dvb_usb_dib0700 [ 258.929698] mt2060 I2C read failed [ 265.935059] mt2060 I2C read failed [ 1168.898547] mt2060 I2C read failed [ 1341.069358] mt2060 I2C read failed [ 1352.251714] mt2060 I2C read failed [ 1377.450039] mt2060 I2C read failed [ 2299.923845] mt2060 I2C write failed (len=6) [ 3074.045737] mt2060 I2C read failed [ 3242.035822] mt2060 I2C write failed (len=2) [ 5217.376468] mt2060 I2C read failed [ 5220.170838] mt2060 I2C read failed [ 5256.550148] mt2060 I2C write failed (len=6) etc... I am using this firmware: [EMAIL PROTECTED]:~$ md5sum /lib/firmware/dvb-usb-dib0700-1.10.fw 5878ebfcba2d8deb90b9120eb89b02da /lib/firmware/dvb-usb-dib0700-1.10.fw [EMAIL PROTECTED]:~$ ls -al /lib/firmware/dvb-usb-dib0700-1.10.fw -rw-r--r-- 1 root root 34306 2007-12-07 19:39 /lib/firmware/dvb- usb-dib0700-1.10.fw This version of linux: [EMAIL PROTECTED]:~$ cat /proc/version Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 The IR-receiver is not connected. I appreciate any help! /D
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb