Hi, I'm just trying to apply the first patch mentioned on the wiki for this cardad I'm getting the following result:
From http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%28A700%29<http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%2528A700%2529> : # patch -p1 < ../1_avertv_A700_analog_part.diff patching file linux/drivers/media/video/saa7134/saa7134-cards.c Hunk #1 succeeded at 3992 with fuzz 2 (offset 41 lines). Hunk #2 succeeded at 4243 (offset 41 lines). Hunk #3 succeeded at 5233 (offset 59 lines). patching file linux/drivers/media/video/saa7134/saa7134.h Hunk #1 FAILED at 260. 1 out of 1 hunk FAILED -- saving rejects to file linux/drivers/media/video/saa7134/saa7134.h.rej patching file linux/Documentation/video4linux/CARDLIST.saa7134 Hunk #1 FAILED at 129. 1 out of 1 hunk FAILED -- saving rejects to file linux/Documentation/video4linux/CARDLIST.saa7134.rej linux/drivers/media/video/saa7134/saa7134.h.rej: *************** *** 260,265 **** #define SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM 128 #define SAA7134_BOARD_BEHOLD_607_9FM 129 #define SAA7134_BOARD_BEHOLD_M6 130 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 --- 260,266 ---- #define SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM 128 #define SAA7134_BOARD_BEHOLD_607_9FM 129 #define SAA7134_BOARD_BEHOLD_M6 130 + #define SAA7134_BOARD_AVERMEDIA_A700 131 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 This is with a clean copy of the repository. Apparently in the HG saa7134.hfile the value 131 is assigned to a Twinhan card: saa7134.h:260 #define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131 Anyway, I've added the #define for the A700 card (so I have now 2 cards using the same ID...), and the dmesg output I'm getting is the following: [ 27.988329] saa7130/34: v4l2 driver version 0.2.14 loaded [ 27.999541] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 27.999550] saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 16, latency: 32, mmio: 0 xfddfe000 [ 27.999556] saa7133[0]: subsystem: 1461:a7a1, board: UNKNOWN/GENERIC [card=0,autodetec ted] [ 27.999566] saa7133[0]: board init: gpio is 2f600 [ 28.125847] nvidia: module license 'NVIDIA' taints kernel. [ 28.263205] ACPI: Fan [FAN] (on) [ 28.524850] saa7133[0]: i2c eeprom 00: 61 14 a1 a7 ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524856] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524860] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524864] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524868] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524872] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524876] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524880] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524883] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524887] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524891] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524895] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524899] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524903] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.524907] saa7133[0]: i2c eeprom e0: 00 01 81 af ea b5 ff ff ff ff ff ff ff ff ff ff [ 28.524911] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.551625] saa7133[0]: registered device video0 [v4l2] [ 28.551640] saa7133[0]: registered device vbi0 Unfortunately I can't test if it works or not, as I don't have any device to attach to the analog input. Best regards, Eduard Huguet
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb