The channel isn't encrypted. (I have tested with many public chanels, that I know isnt encrypted. Cant get any video out)
Im Debian-tesing user, and this is a freshly installed system. On a amd64.. (as I mentioned, in previous email) Turns out "/dev/dvb/adapter0/dvr0" isnt the only device that doesnt work. (framebuffer didnt work ether, "/dev/fd0" are missing totaly, regardless of bootloader vga=791 options or so). I removed (by now mistake) older kernels when I distupgraded, cant nerrow down the error search, by testing other linux-kernels. (since I only have one, the 2.6.22-3-amd64) And snapshot.debian.net didnt record any older.. Only option left, to start compilling by myslef. (but to rough) Probably testing another distro (Ubunto) next week. CityK wrote: > Per Blomqvist wrote: >> I just signed up for this mailing-list ( I hope this is the right >> forum.. > > Hi, yes, you're in the right place. > >> I can "dvbscan" and "tzap", and gets indication of a good signal. >> BUT, I cant view the video! >> (from the dvb device) >> >> Also "dvbdate" command works (that returns time and date from the >> air, I presume). But not a command as "dvbsnoop" (that need >> "/dev/dvb/adapter0/dvr"). >> >> A sample: ( Its step by step of your guide: >> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device ) >> >> In one console I run: /.tzap# tzap -r -c channels.conf "TV4 Öresund" >> ( and are getting lines as: >> status 1f | signal c3c3 | snr ffff | ber 0000004a | unc 00000000 | >> FE_HAS_LOCK >> status 1f | signal c3c3 | snr ffff | ber 0000004e | unc 00000000 | >> FE_HAS_LOCK >> ... >> AND in another console: >> mplayer -v /dev/dvb/adapter0/dvr0 >> (thats basically halts without any further information) >> >> ALSO if I type: "cat /dev/dvb/adapter0/dvr0 > afile.txt" >> (But then again, "afile.txt" remains empty) >> >> Conclusion, /dev/dvb/adapter0/dvr0 never returns anything. This >> "/dev/dvb/adapter0/dvr" isnt proper. Must be a Linux-kernel/module >> problem.. >> > > Not so fast! If the channel is encrypted, this is precisely what you > will observe ... though, because this is over-the-air that we're > talking about, this seems less likely to be the case (but you will > have to confirm nonetheless). > I'm more inclined to think that this is related to an issue with > stream identifiers. Is Sweden using MP4 now? Some further questions, > what drivers are you using (distro or recent LinuxTV)? > What dvb-apps ... Christophe had updated the dvb-apps not to long ago > with some changes in regards to MP4 streams (can't remember the exact > nature, but perhaps you should grab a new copy from LinuxTV and try > with those). > Whatever frontend I test, it will not work. The device, never stream anything. I can tune, but not view the video. (thats it) -- Mvh, *Per **Blomqvist* Web: http://phoohb.shellkonto.se Telnr: +46 70-3355632 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
