From: Roy Franz <roy.fr...@linaro.org>
This patch adds EFI stub support for the ARM Linux kernel.
The EFI stub operates similarly to the x86 and arm64 stubs: it is a
shim between the EFI firmware and the normal zImage entry point, and
sets up the environment that the zImage is expecting. This includes
optionally loading the initrd and device tree from the system partition
based on the kernel command line.
Signed-off-by: Roy Franz <roy.fr...@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheu...@linaro.org>
---
arch/arm/Kconfig | 19 +++
arch/arm/boot/compressed/Makefile | 5 +-
arch/arm/boot/compressed/efi-header.S | 130 ++++++++++++++++++++
arch/arm/boot/compressed/efi-stub.c | 89 ++++++++++++++
arch/arm/boot/compressed/head.S | 54 +++++++-
arch/arm/boot/compressed/vmlinux.lds.S | 7 ++
arch/arm/include/asm/efi.h | 23 ++++
drivers/firmware/efi/libstub/Makefile | 12 ++
8 files changed, 336 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4b7d6cfd8eb..6d7fd83c2ee4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2061,6 +2061,25 @@ config AUTO_ZRELADDR
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
+config EFI_STUB
+ bool
+
+config EFI
+ bool "UEFI runtime support"
+ depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
+ select UCS2_STRING
+ select EFI_PARAMS_FROM_FDT
+ select EFI_STUB
+ select EFI_ARMSTUB
+ select EFI_RUNTIME_WRAPPERS
+ ---help---
+ This option provides support for runtime services provided
+ by UEFI firmware (such as non-volatile variables, realtime
+ clock, and platform reset). A UEFI stub is also provided to
+ allow the kernel to be booted as an EFI application. This
+ is only useful for kernels that may run on systems that have
+ UEFI firmware.
+
endmenu
menu "CPU Power Management"
diff --git a/arch/arm/boot/compressed/Makefile
b/arch/arm/boot/compressed/Makefile
index 3f9a9ebc77c3..0e5624d6215d 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -167,9 +167,12 @@ if [ $(words $(ZRELADDR)) -gt 1 -a
"$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
false; \
fi
+efi-obj-$(CONFIG_EFI_STUB) := $(obj)/efi-stub.o $(obj)/efi-banner.o \
+ $(objtree)/drivers/firmware/efi/libstub/lib.a
+
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
- $(bswapsdi2) FORCE
+ $(bswapsdi2) $(efi-obj-y) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)
diff --git a/arch/arm/boot/compressed/efi-header.S
b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000000..9d5dc4fda3c1
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013-2015 Linaro Ltd
+ * Authors: Roy Franz <roy.fr...@linaro.org>
+ * Ard Biesheuvel <ard.biesheu...@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro __nop
+#ifdef CONFIG_EFI_STUB
+ @ This is almost but not quite a NOP, since it does clobber the
+ @ condition flags. But it is the best we can do for EFI, since
+ @ PE/COFF expects the magic string "MZ" at offset 0, while the
+ @ ARM/Linux boot protocol expects an executable instruction
+ @ there.
+ .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000
+#else
+ mov r0, r0
+#endif
+ .endm
+
+ .macro __EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+ b __efi_start
+
+ .set start_offset, __efi_start - start
+ .org start + 0x3c
+ @
+ @ The PE header can be anywhere in the file, but for
+ @ simplicity we keep it together with the MSDOS header
+ @ The offset to the PE/COFF header needs to be at offset
+ @ 0x3C in the MSDOS header.
+ @ The only 2 fields of the MSDOS header that are used are this
+ @ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+ @
+ .long pe_header - start @ Offset to the PE header.
+
+pe_header:
+ .ascii "PE\0\0"
+
+coff_header:
+ .short 0x01c2 @ ARM or Thumb
+ .short 2 @ nr_sections
+ .long 0 @ TimeDateStamp
+ .long 0 @ PointerToSymbolTable
+ .long 1 @ NumberOfSymbols
+ .short section_table - optional_header
+ @ SizeOfOptionalHeader
+ .short 0x306 @ Characteristics.
+ @ IMAGE_FILE_32BIT_MACHINE |
+ @ IMAGE_FILE_DEBUG_STRIPPED |
+ @ IMAGE_FILE_EXECUTABLE_IMAGE |
+ @ IMAGE_FILE_LINE_NUMS_STRIPPED
+
+optional_header:
+ .short 0x10b @ PE32 format
+ .byte 0x02 @ MajorLinkerVersion
+ .byte 0x14 @ MinorLinkerVersion
+ .long _end - __efi_start @ SizeOfCode
+ .long 0 @ SizeOfInitializedData
+ .long 0 @ SizeOfUninitializedData
+ .long efi_stub_entry - start @ AddressOfEntryPoint
+ .long start_offset @ BaseOfCode
+ .long 0 @ data
+
+extra_header_fields:
+ .long 0 @ ImageBase
+ .long 0x200 @ SectionAlignment
+ .long 0x200 @ FileAlignment
+ .short 0 @ MajorOperatingSystemVersion
+ .short 0 @ MinorOperatingSystemVersion
+ .short 0 @ MajorImageVersion
+ .short 0 @ MinorImageVersion
+ .short 0 @ MajorSubsystemVersion
+ .short 0 @ MinorSubsystemVersion
+ .long 0 @ Win32VersionValue
+
+ .long _end - start @ SizeOfImage
+ .long start_offset @ SizeOfHeaders
+ .long 0 @ CheckSum
+ .short 0xa @ Subsystem (EFI application)
+ .short 0 @ DllCharacteristics
+ .long 0 @ SizeOfStackReserve
+ .long 0 @ SizeOfStackCommit
+ .long 0 @ SizeOfHeapReserve
+ .long 0 @ SizeOfHeapCommit
+ .long 0 @ LoaderFlags
+ .long 0x6 @ NumberOfRvaAndSizes
+
+ .quad 0 @ ExportTable
+ .quad 0 @ ImportTable
+ .quad 0 @ ResourceTable
+ .quad 0 @ ExceptionTable
+ .quad 0 @ CertificationTable
+ .quad 0 @ BaseRelocationTable
+
+section_table:
+ @
+ @ The EFI application loader requires a relocation section
+ @ because EFI applications must be relocatable. This is a
+ @ dummy section as far as we are concerned.
+ @
+ .ascii ".reloc\0\0"
+ .long 0 @ VirtualSize
+ .long 0 @ VirtualAddress
+ .long 0 @ SizeOfRawData
+ .long 0 @ PointerToRawData
+ .long 0 @ PointerToRelocations
+ .long 0 @ PointerToLineNumbers
+ .short 0 @ NumberOfRelocations
+ .short 0 @ NumberOfLineNumbers
+ .long 0x42100040 @ Characteristics
+
+ .ascii ".text\0\0\0"
+ .long _end - __efi_start @ VirtualSize
+ .long __efi_start @ VirtualAddress
+ .long _edata - __efi_start @ SizeOfRawData
+ .long __efi_start @ PointerToRawData
+ .long 0 @ PointerToRelocations
+ .long 0 @ PointerToLineNumbers
+ .short 0 @ NumberOfRelocations
+ .short 0 @ NumberOfLineNumbers
+ .long 0xe0500020 @ Characteristics
+
+ .align 9
+__efi_start:
+#endif
+ .endm
diff --git a/arch/arm/boot/compressed/efi-stub.c
b/arch/arm/boot/compressed/efi-stub.c
new file mode 100644
index 000000000000..f1a3b1825337
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-stub.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/boot/compressed/efi-stub.c
+ *
+ * Copyright (C) 2013 Linaro Ltd; <roy.fr...@linaro.org>
+ *
+ * This file implements the EFI boot stub for the ARM kernel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+ unsigned long *image_addr,
+ unsigned long *image_size,
+ unsigned long *reserve_addr,
+ unsigned long *reserve_size,
+ unsigned long dram_base,
+ efi_loaded_image_t *image)
+{
+ unsigned long nr_pages;
+ efi_status_t status;
+ /* Use alloc_addr to tranlsate between types */
+ efi_physical_addr_t alloc_addr;
+
+ /*
+ * Verify that the DRAM base address is compatible with the ARM
+ * boot protocol, which determines the base of DRAM by masking
+ * off the low 27 bits of the address at which the zImage is
+ * loaded. These assumptions are made by the decompressor,
+ * before any memory map is available.
+ */
+ dram_base = round_up(dram_base, SZ_128M);
+
+ /*
+ * Reserve memory for the uncompressed kernel image. This is
+ * all that prevents any future allocations from conflicting
+ * with the kernel. Since we can't tell from the compressed
+ * image how much DRAM the kernel actually uses (due to BSS
+ * size uncertainty) we allocate the maximum possible size.
+ * Do this very early, as prints can cause memory allocations
+ * that may conflict with this.
+ */
+ alloc_addr = dram_base;
+ *reserve_size = MAX_UNCOMP_KERNEL_SIZE;
+ nr_pages = round_up(*reserve_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+ status = sys_table->boottime->allocate_pages(EFI_ALLOCATE_ADDRESS,
+ EFI_LOADER_DATA,
+ nr_pages, &alloc_addr);
+ if (status != EFI_SUCCESS) {
+ *reserve_size = 0;
+ pr_efi_err(sys_table, "Unable to allocate memory for
uncompressed kernel.\n");
+ return status;
+ }
+ *reserve_addr = alloc_addr;
+
+ /*
+ * Relocate the zImage, if required. ARM doesn't have a
+ * preferred address, so we set it to 0, as we want to allocate
+ * as low in memory as possible.
+ */
+ *image_size = image->image_size;
+ status = efi_relocate_kernel(sys_table, image_addr, *image_size,
+ *image_size, 0, 0);
+ if (status != EFI_SUCCESS) {
+ pr_efi_err(sys_table, "Failed to relocate kernel.\n");
+ efi_free(sys_table, *reserve_size, *reserve_addr);
+ *reserve_size = 0;
+ return status;
+ }
+
+ /*
+ * Check to see if we were able to allocate memory low enough
+ * in memory. The kernel determines the base of DRAM from the
+ * address at which the zImage is loaded.
+ */
+ if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) {
+ pr_efi_err(sys_table, "Failed to relocate kernel, no low memory
available.\n");
+ efi_free(sys_table, *reserve_size, *reserve_addr);
+ *reserve_size = 0;
+ efi_free(sys_table, *image_size, *image_addr);
+ *image_size = 0;
+ return EFI_LOAD_ERROR;
+ }
+ return EFI_SUCCESS;
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59980..af11c2f8f3b7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -12,6 +12,8 @@
#include <asm/assembler.h>
#include <asm/v7m.h>
+#include "efi-header.S"
+
AR_CLASS( .arch armv7-a )
M_CLASS( .arch armv7-m )
@@ -126,7 +128,7 @@
start:
.type start,#function
.rept 7
- mov r0, r0
+ __nop
.endr
ARM( mov r0, r0 )
ARM( b 1f )
@@ -139,7 +141,8 @@ start:
.word 0x04030201 @ endianness flag
THUMB( .thumb )
-1:
+1: __EFI_HEADER
+
ARM_BE8( setend be ) @ go BE8 if compiled for BE8
AR_CLASS( mrs r9, cpsr )
#ifdef CONFIG_ARM_VIRT_EXT
@@ -1353,6 +1356,53 @@ __enter_kernel:
reloc_code_end:
+#ifdef CONFIG_EFI_STUB
+ .align 2
+_start: .long start - .
+
+ENTRY(efi_stub_entry)
+ @ allocate space on stack for passing current zImage address
+ @ and for the EFI stub to return of new entry point of
+ @ zImage, as EFI stub may copy the kernel. Pointer address
+ @ is passed in r2. r0 and r1 are passed through from the
+ @ EFI firmware to efi_entry
+ adr ip, _start
+ ldr r3, [ip]
+ add r3, r3, ip
+ stmfd sp!, {r3, lr}
+ mov r2, sp @ pass zImage address in r2
+ bl efi_entry
+
+ @ Check for error return from EFI stub. r0 has FDT address
+ @ or error code.
+ cmn r0, #1
+ beq efi_load_fail
+
+ @ Preserve return value of efi_entry() in r4
+ mov r4, r0
+ bl cache_clean_flush
+ bl cache_off
+
+ @ Set parameters for booting zImage according to boot protocol
+ @ put FDT address in r2, it was returned by efi_entry()
+ @ r1 is the machine type, and r0 needs to be 0
+ mov r0, #0
+ mov r1, #0xFFFFFFFF
+ mov r2, r4
+
+ @ Branch to (possibly) relocated zImage that is in [sp]
+ ldr lr, [sp]
+ ldr ip, =start_offset
+ add lr, lr, ip
+ mov pc, lr @ no mode switch
+
+efi_load_fail:
+ @ Return EFI_LOAD_ERROR to EFI firmware on error.
+ ldr r0, =0x80000001
+ ldmfd sp!, {ip, pc}
+ENDPROC(efi_stub_entry)
+#endif
+
.align
.section ".stack", "aw", %nobits
.L_user_stack: .space 4096
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S
b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843ac5e..81c493156ce8 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -48,6 +48,13 @@ SECTIONS
*(.rodata)
*(.rodata.*)
}
+ .data : {
+ /*
+ * The EFI stub always executes from RAM, and runs strictly before the
+ * decompressor, so we can make an exception for its r/w data, and keep it
+ */
+ *(.data.efistub)
+ }
.piggydata : {
*(.piggydata)
}
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 2622322f1135..bf22d0d1d52d 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -66,4 +66,27 @@ void efi_virtmap_unload(void);
#define efi_parse_fdt(x)
#endif /* CONFIG_EFI */
+/* arch specific definitions used by the stub code */
+
+#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__)
+
+/*
+ * A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
+ * so we will reserve that amount of memory. We have no easy way to tell what
+ * the actuall size of code + data the uncompressed kernel will use.
+ * If this is insufficient, the decompressor will relocate itself out of the
+ * way before performing the decompression.
+ */
+#define MAX_UNCOMP_KERNEL_SIZE SZ_32M
+
+/*
+ * The kernel zImage should preferably be located between 32 MB and 128 MB
+ * from the base of DRAM. The min address leaves space for a maximal size
+ * uncompressed image, and the max address is due to how the zImage
decompressor
+ * picks a destination address.
+ */
+#define ZIMAGE_OFFSET_LIMIT SZ_128M
+#define MIN_ZIMAGE_OFFSET MAX_UNCOMP_KERNEL_SIZE
+#define MAX_FDT_OFFSET ZIMAGE_OFFSET_LIMIT
+
#endif /* _ASM_ARM_EFI_H */
diff --git a/drivers/firmware/efi/libstub/Makefile
b/drivers/firmware/efi/libstub/Makefile
index 50557f4d12db..6d86e2713e9f 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -62,3 +62,15 @@ quiet_cmd_stubcopy = STUBCPY $@
$(OBJDUMP) -r $@ | grep R_AARCH64_ABS \
&& (echo >&2 "$@: absolute symbol references not allowed
in the EFI stub"; \
rm -f $@; /bin/false); else /bin/false; fi
+
+#
+# ARM discards the .data section because it disallows r/w data in the
+# decompressor. So move our .data to .data.efistub, which is preserved
+# explicitly by the decompressor linker script.
+#
+extra-$(CONFIG_ARM) := $(lib-y)
+lib-$(CONFIG_ARM) := $(patsubst %.o,%.stub.o,$(lib-y))
+
+$(obj)/%.stub.o: OBJCOPYFLAGS := --rename-section .data=.data.efistub
+$(obj)/%.stub.o: $(obj)/%.o FORCE
+ $(call if_changed,objcopy)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
