On Tue, Feb 05, 2019 at 10:05:16AM -0500, Masayoshi Mizuma wrote: > From: Masayoshi Mizuma <m.miz...@jp.fujitsu.com> > Date: Tue, 5 Feb 2019 10:00:59 -0500 > Subject: [PATCH] x86/mm: Introduce adjustment the padding size for KASLR
"Adjust the padding size for KASLR" > If the physical memory layout has huge space for hotplug, the padding > used for the physical memory mapping section is not enough. > So, such system may crash while memory hot-adding on KASLR enabled system. Crash why? Why is the padding not enough? > For example, SRAT has the following layout, the maximum possible memory > size is 32TB, and the memory is installed as 2TB actually, then the padding > size should set 30TB (== possible memory size - actual memory size). > > SRAT: Node 3 PXM 7 [mem 0x1c0000000000-0x1fffffffffff] hotplug What is that supposed to exemplify: that range is 3T not 2 and that range start is not at 2T but 28T. So I have absolutely no clue what you're trying to explain here. Please go back, take your time and structure your commit message like this: Problem is A. It happens because of B. Fix it by doing C. (Potentially do D). For more detailed info, see Documentation/process/submitting-patches.rst, Section "2) Describe your changes". > This patch introduces adjustment the padding size if the default Avoid having "This patch" or "This commit" in the commit message. It is tautologically useless. Also, do $ git grep 'This patch' Documentation/process for more details. > padding size isn't enough. > > Signed-off-by: Masayoshi Mizuma <m.miz...@jp.fujitsu.com> > --- > Documentation/x86/zero-page.txt | 1 + > arch/x86/boot/compressed/acpi.c | 19 +++++++++++++++---- > arch/x86/include/uapi/asm/bootparam.h | 2 +- > arch/x86/mm/kaslr.c | 26 +++++++++++++++++++++++++- > 4 files changed, 42 insertions(+), 6 deletions(-) > > diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt > index 68aed077f..343fe1a90 100644 > --- a/Documentation/x86/zero-page.txt > +++ b/Documentation/x86/zero-page.txt > @@ -15,6 +15,7 @@ Offset Proto Name Meaning > 058/008 ALL tboot_addr Physical address of tboot shared page > 060/010 ALL ist_info Intel SpeedStep (IST) BIOS support > information > (struct ist_info) > +078/010 ALL possible_mem_addr The possible maximum physical memory > address. Why isn't this called max_phys_addr then? Also, please explain what it means at the end of this file. > 080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! > 090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! > 0A0/010 ALL sys_desc_table System description table (struct > sys_desc_table), > diff --git a/arch/x86/boot/compressed/acpi.c b/arch/x86/boot/compressed/acpi.c > index c5a949335..7dd61b943 100644 > --- a/arch/x86/boot/compressed/acpi.c > +++ b/arch/x86/boot/compressed/acpi.c > @@ -288,6 +288,7 @@ int count_immovable_mem_regions(void) > struct acpi_subtable_header *sub_table; > struct acpi_table_header *table_header; > char arg[MAX_ACPI_ARG_LENGTH]; > + unsigned long long possible_addr, max_possible_addr = 0; > int num = 0; > > if (cmdline_find_option("acpi", arg, sizeof(arg)) == 3 && > @@ -308,10 +309,19 @@ int count_immovable_mem_regions(void) > struct acpi_srat_mem_affinity *ma; > > ma = (struct acpi_srat_mem_affinity *)sub_table; > - if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && > ma->length) { > - immovable_mem[num].start = ma->base_address; > - immovable_mem[num].size = ma->length; > - num++; > + if (ma->length) { > + if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) { > + possible_addr = > + ma->base_address + ma->length; > + if (possible_addr > max_possible_addr) > + max_possible_addr = > + possible_addr; > + } else { > + immovable_mem[num].start = > + ma->base_address; > + immovable_mem[num].size = ma->length; > + num++; > + } This piece has some ugly linebreaks which makes it impossible to read. Perhaps because the variable names you're adding are too long. You can carve it out in a separate function, for example. > if (num >= MAX_NUMNODES*2) { > @@ -320,6 +330,7 @@ int count_immovable_mem_regions(void) > } > } > table += sub_table->length; > + boot_params->possible_mem_addr = max_possible_addr; This assignment is inside the loop and happens potentially a bunch of times. Why? > } > return num; > } > diff --git a/arch/x86/include/uapi/asm/bootparam.h > b/arch/x86/include/uapi/asm/bootparam.h > index 60733f137..5b64b606e 100644 > --- a/arch/x86/include/uapi/asm/bootparam.h > +++ b/arch/x86/include/uapi/asm/bootparam.h > @@ -156,7 +156,7 @@ struct boot_params { > __u64 tboot_addr; /* 0x058 */ > struct ist_info ist_info; /* 0x060 */ > __u64 acpi_rsdp_addr; /* 0x070 */ > - __u8 _pad3[8]; /* 0x078 */ > + __u64 possible_mem_addr; /* 0x078 */ > __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ > __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ > struct sys_desc_table sys_desc_table; /* obsolete! */ /* 0x0a0 */ > diff --git a/arch/x86/mm/kaslr.c b/arch/x86/mm/kaslr.c > index 3f452ffed..71fc28570 100644 > --- a/arch/x86/mm/kaslr.c > +++ b/arch/x86/mm/kaslr.c > @@ -70,6 +70,30 @@ static inline bool kaslr_memory_enabled(void) > return kaslr_enabled() && !IS_ENABLED(CONFIG_KASAN); > } > > +static unsigned int __init kaslr_padding(void) > +{ > + unsigned int rand_mem_physical_padding = > + CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING; > +#ifdef CONFIG_MEMORY_HOTPLUG > + unsigned long long max_possible_phys, max_actual_phys, threshold; > + > + if (!boot_params.possible_mem_addr) > + goto out; > + > + max_actual_phys = roundup(PFN_PHYS(max_pfn), 1ULL << TB_SHIFT); > + max_possible_phys = roundup(boot_params.possible_mem_addr, > + 1ULL << TB_SHIFT); > + threshold = max_actual_phys + > + ((unsigned long long)rand_mem_physical_padding << TB_SHIFT); > + > + if (max_possible_phys > threshold) > + rand_mem_physical_padding = > + (max_possible_phys - max_actual_phys) >> TB_SHIFT; > +out: > +#endif > + return rand_mem_physical_padding; Same problem: local variables with unnecessarily long names make the code hard to read. Pls shorten. Also, the types in that function are a total mess. An unsigned int which you cast to unsigned long long and return an unsigned int again to add into a sum with unsigned longs. Are you selecting the types randomly? Why aren't you using plain unsigned longs like the rest of the file does with memory addresses? Also, this function could have a comment above it explaining what all that threshold and actual and possible address arithmetic is supposed to do. Thx. -- Regards/Gruss, Boris. Good mailing practices for 400: avoid top-posting and trim the reply.