Bill Traynor wrote: >>> Do you wanna set some breakpoints and inspect variables in makefiles? >>> Have a look at a simple makefile debugger (written in make): > http://www.embedded.com/columns/technicalinsights/197003517?printable=true
The article above shows some macros you can add to your Makefile to show you the values of certain things. It is helpful, but not an interactive debugger. However, the guy who wrote that article did indeed write a full Makefile debugger. I took it for a spin, and found that it worked as advertised on a simple Makefile. I tried it on the kernel Makefile, but without success (but I didn't try very hard). YMMV. I put some of the resources and info I found at: http://elinux.org/Debugging_Makefiles The link from the package's README doesn't work, but here's a link I found to an article about the debugger: http://www.cmcrossroads.com/content/view/6479/120/ -- Tim ============================= Tim Bird Architecture Group Chair, CE Linux Forum Senior Staff Engineer, Sony Corporation of America ============================= -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html