Hallo Stefan, Am 2008-07-05 13:54:28, schrieb Stefan Schoenleitner: > I could still do some peripheral device driver development for the stuff I > want > to attach on the EP3902 board I already bought and do some testing as well. > Can you suggest some specific CPU ? > > Of course features like LAN, USB and such are nice to have, but they are not > required for my design.
Philips/NXP: LH7A400/10/11
00 = I²C,...
10 = Ethetnet without CAN
11 = Ethernet, CAN, I²C,...
> Goals should rather be that the CPU is cheap, easy to get and one should be
> able
> to solder it by hand (e.g. SMD paste and hot-air flow soldering).
> For this reason BGA packages are not possible.
No InfraRed-Welding System available?
I have goten one from eBay AOYUE 710 which cost new 2000€, but on eBay
400€ + transport.
> Is there something like good documentation on how to attach hardware to an
> embedded CPU so that the linux-kernel will work just fine with it ?
Thanks, Greetings and nice Day/Evening
Michelle Konzack
Systemadministrator
24V Electronic Engineer
Tamay Dogan Network
Debian GNU/Linux Consultant
--
Linux-User #280138 with the Linux Counter, http://counter.li.org/
##################### Debian GNU/Linux Consultant #####################
Michelle Konzack Apt. 917 ICQ #328449886
+49/177/9351947 50, rue de Soultz MSN LinuxMichi
+33/6/61925193 67100 Strasbourg/France IRC #Debian (irc.icq.com)
signature.pgp
Description: Digital signature
