On Thu, Aug 14, 2008 at 1:20 PM, Behan Webster <[EMAIL PROTECTED]> wrote: > Grant Likely wrote: >> On Thu, Aug 14, 2008 at 8:35 AM, Behan Webster <[EMAIL PROTECTED]> wrote: >> >>> Grant Likely wrote: >>> >>>> Also, when booting on something like a 5200 with an uncommon serial >>>> ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device >>>> file before it would boot. >>>> >>>> >>> You're using an older version then. The latest (v1.2) allows you to >>> specify the serial port/baud rate when running the tool. >>> >> >> Hmm, I can only find v1.1.2 on your website. >> > Version 1.1.2 of elbs contains v1.2 of the rootfs tool. I suppose I > should Sync the version numbers on a release.
Okay, then I've still got a problem. I did specify the serial port when running it, and the files in /etc were all set correctly. It was just the /dev/ttyPSC0 device file which was missing. g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html