Hi, I'vm new to the list, but after reading through the _entire_ mailing list archive, I've seen several discussions about the AMD Elan cpu's, and about booting Linux without BIOS... However, with my lack of experience with assembly for x86, and lack of experience with the boot process of x86 hardware, I'd love it if someone actually had anything working for booting from an AMD Elan based board with Intel flash, no BIOS, no disk drive etc. I've found code for adapting the FTL block driver for PCMCIA to operate with the onboard flash, so that's not really a problem, just a matter of getting the write/erase timing and commands right... My problem is booting the damn thing from the flash :-) (note: As mentioned this is an Intel flash chip - a 28F640, not one of those fancy and expensive IDE compatible flash disks...) Any input or code you can share would be greatly appreciated. Vidar Hokstad <[EMAIL PROTECTED]>
